Announcement Banner
UNSOLVED

slingbladephil

updated

20 years ago

S

slingbladephil

1 Rookie

•

70 Posts

0

7051

July 14th, 2006 11:00

chkdsk utility help

Ok i am getting erros saying i need to do a chkdsk utility check i have tryed to, but i am doing something wrong. Can sameone give me any suggestions how do do it right??
 
                               THanks phil   :smileymad:
  • Flooby

    2 Intern

    •

    3031 Posts

    182

    0

    Posted July 14th, 2006 11:00

    Right click the icon for your hard drive in My Computer, and select Properties.  Go to the Tools tab there, click on the Error Checking button, check both boxes ( "Automatically fix file system errors" and "Scan for and attempt recovery of bad sectors" ) and press the Start button below.  You'll get a prompt stating that the Checkdisk can't be performed while Windows is in use, and asking you if you want to perform same the next time you reboot.  Answer yes and then reboor the system, and the process should begin at that point.  Depending on the size of your drive and condition of same, the process may take some time - just let it finish, and it'll take to to Windows (or the Welcome screen) when it's finished.  

    Message Edited by Flooby on 07-14-200606:07 PM

  • slingbladephil

    1 Rookie

    •

    70 Posts

    182

    0

    Posted July 14th, 2006 12:00

    ok i tryed to do the chkdsk utility it worked on my f drive but when i tryed doing my c drive it always says  The disk check could not be performed because the disk utility needs exclusive acces to some windows files on disk. These files can be accessed only by restarting windows.  Well i restarted windows at lease 4 time and i get the same messegae when  i try the chdsk utility.

                                                    THanks Phil

  • Mary G

    6 Operator

    •

    20095 Posts

    182

    0

    Posted July 14th, 2006 13:00

    You missed the question Do you want to run checkdisk on reboot? You must answer Yes to this question, press enter, then reboot and don't touch the keyboard when it reboots. If you press any key, you'll cancel the scan.
  • slingbladephil

    1 Rookie

    •

    70 Posts

    182

    0

    Posted July 15th, 2006 11:00

    Ok either there is something wrong with my computer or i am stupied here, i rebooted than it went to my sighn in screen than windows loaded up nothing happened is it suppose to tell me its scanning???? I did everything i was told to do as well.
     
  • Mary G

    6 Operator

    •

    20095 Posts

    182

    0

    Posted July 15th, 2006 18:00

    Type CHKDSK in the Run box--without any /f or /r. It will run in Read Only mode and tell you if you need to rerun it.
    And then try this--Open My Computer, right click on the C drive, properties, tools tab, select error checking, put checkmarks in both boxes, and THEN say yes to run on reboot. See if that works. Remember not to touch the keyboard during reboot.
  • slingbladephil

    1 Rookie

    •

    70 Posts

    182

    0

    Posted July 16th, 2006 20:00

     Hi Mary I did what you said and it didnt do anything at all, i really want to do is do a defrag but it wont let me. Because  it says i need to do a chkdsk. So i dont know what to do now.
  • AgeAvakian

    1 Message

    182

    0

    Posted June 6th, 2008 17:00

    I am having the EXACT same problem as Phil. Mine started with an aolload.exe - Corrupt File message which keeps popping up. So AOL said to uninstall AOL and then do this stuff. Running Chkdsk utility. When I put it in to run it does nothing visible, even at restart.  It also says I have to be the administrator and I AM. This is getting frustrating. Is there another way?