Be sure to read and follow the safety guidelines to protect your computer from potential damage and ensure your personal safety. For more information about safety guidelines, see the owner's manual at Dell.com/Support. Before you begin., turn off the computer and disconnect all the attached peripherals.
To remove the solid state drive. Identify and unlatch the right side cover. Lift the cover off the device. Find and unlatch the PSU hinge. Move the tabs to the unlocked position and lift the hinge to open it. Identify and unlatch the graphics card. Disconnect the cables and unlatch the card to remove it. Identify the solid state drive and remove the screws, securing it. Lift the drive out of the system.
To reinstall the solid state drive, place it back in the system and install the screw to secure it. Relatch the graphics card. Reconnect the cables and relatch the card. Push the PSU hinge down to close it and move the tabs to the locked position. Relax the right side cover to the system. For more information about your Dell system, visit Dell.com/Support.
