CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
Follow the safety guidelines listed in the Safety instructions section.
Follow the procedure listed in the Before working inside your system section.
Turn off the sled by using the Chassis Management Controller (CMC).
Remove the sled from the enclosure.
Install the I/O connector cover.
Installing the Trusted Platform Module:
Locate the Trusted Platform Module (TPM) connector on the system board.
NOTE: To locate the TPM connector on the system board, see the System board connectors section.
Align the edge connectors on the TPM with the slot on the TPM connector.
Insert the TPM into the TPM connector such that the plastic bolt aligns with the slot on the system board.
Press the plastic bolt until the bolt snaps into place.
Install the system board.
Follow the procedure listed in the After working inside your system section.
Install the sled in the enclosure.
Turn on the sled.
