How to Replace the Fan for PowerScale F200 or F600

This video will demonstrate the replacement procedure of a Fan for the PowerScale F200 or F600.

Here's how to the replace the fan on your PowerScale F200 or F600. To remove the top cover turn the screw, release the latch, then lift off the cover.

Remove the air shroud by lifting it with the tabs, then lift the fan while squeezing the catch. Fit the new fan, pressing the catch to secure it, then replace the air shroud. To replace the top cover, first seat it on the pin of the latch, then close the latch, and tighten the screw.

Thanks for watching