Um eine Beschädigung Ihres Computers zu vermeiden, sollten Sie ihn während einer BIOS-Aktualisierung niemals ausschalten oder von der Stromquelle trennen. Während der Aktualisierung wird Ihr Computer neu gestartet und Ihnen wird kurzzeitig ein schwarzer Bildschirm angezeigt.
Lesen Sie vor der Aktualisierung die Installationsanweisungen und die unten aufgeführten wichtigen Informationen.
Dell Vostro 3650/3653/3250 System BIOS
Neustart erforderlichAUTOMATISCH INSTALLIERTDiese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
This package contains the Dell system BIOS update for Dell Vostro 3650, 3653, 3250 systems that runs the Windows operating systems. BIOS is a firmware that is embedded on a small memory chip on the computer's system board. It controls the keyboard, monitor, disk drives and other devices. This update addresses the security advisory INTEL-SA-00185..
Um alle Treiber für Ihr Vostro 3650-Display anzeigen zu können, navigieren Sie zuTreiber und Downloads.
Empfohlen
Die neueste verfügbare Version des Treibers wird geladen ...
Dies ist die neueste von Dell validierte Version dieses Treibers.
Dies ist nicht die neueste von Dell validierte Version dieses Treibers.
Dieses Dateiformat umfasst eine unter BIOS ausführbare Datei. Das universelle (Windows/MS-DOS) Format kann zur Installation aus jeder Windows oder MS DOS-Umgebung verwendet werden.
Um die Integrität Ihres Downloads zu sichern, prüfen Sie bitte den Prüfsummenwert.
Melden Sie sich bei Windows als AdministratorIn an, um den automatischen Scan zu nutzen. Wenn Sie bereits als AdministratorIn angemeldet sind und diese Meldung angezeigt wird, führen Sie einen Neustart durch.Ihr System wird von Ihrem IT-Administrator verwaltet und die Funktionen sind möglicherweise eingeschränkt.
Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.
Dell Technologies empfiehlt dringend, dieses Update so schnell wie möglich durchzuführen. Das Update enthält wichtige Fehlerbehebungen und Änderungen zur Verbesserung der Funktionalität, Zuverlässigkeit und Stabilität Ihres Dell Systems. Es kann auch Sicherheitspatches und andere Funktionsverbesserungen enthalten.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Run the BIOS update utility from Windows environment.
Download and Installation 1. Click Download File. 2. Click Save to save the file to your hard drive 3. Browse to the location where you downloaded the file and double-click the new file. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Run the BIOS update utility from DOS environment (Non-Windows users)
Installation Note: You must provide a bootable USB drive. This executable file does not create the DOS system files. 1. Copy the downloaded file to a bootable USB drive. 2. Power on the system and then Press the F12 key. 3. Select USB Storage Device and boot to the DOS prompt. 4. Run the file by typing following command. For example: C:\ Precision_5530_X.Y.Z.exe Where C is the drive letter of the USB device where the executable file is located and Precision_5530_X.Y.Z.exe is the name of the downloaded file. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from a DOS environment with UEFI boot mode (Non-Windows users, Load Legacy Option Disabled) 1. Copy the downloaded file to a bootable DOS USB drive. 2. Power on the system and then go to BIOS Setup by pressing the F2 key. 3. Go to General > Boot Sequence > Boot > Boot List Option. 4. Change UEFI to Legacy of Boot List Option. 5. Go to Exit > Save Changes and reboot system. 6. Press F12 and then select USB Storage Device and boot to the DOS prompt. 7. Run the file by typing the file name. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again. 8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option. 9. Change Legacy to UEFI Boot Option. 10. Go to Exit > Save Changes and reboot the system.
Benötigen Sie Hilfe bei BIOS-Problemen?
Sie finden eine Lösung im Dell Benutzerhandbuch zur Verwendung des BIOS und zum Troubleshooting.