Dell Precision 3930 Rack System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : 4RP6P

Importance : Critical

Version : 1.0.3, 1.0.3 Latest version Recommended version Latest and Recommended version

Release Date : 15 Aug 2018

Download Type : System BIOS

Category : BIOS

This package provides the Dell System BIOS update and is supported on Dell Precision 3930 Tower for Windows Operating Systems.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: Precision_3930_1.0.3_x64.exe

File size: 10.59 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: a9f62b48f0d02f4777d2bd90a339ebf4

SHA1: a3625e831c1b0df97d727b3417c7ea949d6fed67

SHA-256: 1ab78ceaf8ec2fec9ecc9b2d96d371fc7373af869815787b0dfda73c902516ac

Download .EXE

Fixes & Enhancements

Fixes:
- Updated Intel ME Firmware to address security advisories INTEL-SA-00125 (CVE-2018-3655), INTEL-SA-00141 (CVE-2018-3657 CVE-2018-3658 CVE-2018-3616) &
INTEL-SA-00131 (CVE-2018-3643 CVE-2018-3644).
- Fixed the TPM configuration on a TPM startup error during S3 resume.
- Fixed a potential issue with binary image measurement using the Linux UEFI shim bootloader.
- Addressed a WOL issue when OS fast start up is enabled.

Enhancements:
- Enhanced system performance in turbo mode.

Installation instructions

BIOS Update Executable for Windows

Download
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Perform the BIOS update from the BIOS Boot Menu, independent of operating system.
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.

--------------------------------------------------------------------------------
Note 1: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.

Dell Precision 3930 Rack System BIOS

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to