Dell Product DSS9600/9620/9630 Rack firmware

Restart required

Driver Id : C4P5X

Importance : Recommended

Version : A00, A00 Latest version Recommended version Latest and Recommended version

Release Date : 08 Jan 2019

Download Type : Firmware

Category : Device Firmware

Dell Product DSS9600/9620/9630 Rack firmware

Download Files

File Format: This file format contains plain text which can be viewed with a standard text editor.

File Name: DSS9000_rack_fw_3.65.04_readme.txt

File size: 1.68 KB

To ensure the integrity of your download, please verify the checksum value.

MD5: 995c03dba2e5a4357ff7e0ba86d53b75

SHA1: aa00c84a68cd0049a7e2cc5c92f400e00e5bff4d

SHA-256: 8aa6d19e923b540d55605b32737429dbe81f85dfa6235dd3ba3e236144d63bfe

Download .TXT

File Format: This format consists of gnu zip files for software installation.

File Name: C4P5X_RMg5update_03.65.04.tar.gz

File size: 122.09 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: b5d08bdec53ae2a8657767d8b67acd60

SHA1: 5b9fc54152252eaedbd0a3185835534be6a0a259

SHA-256: 4c85830d0ff3d1aa01c4a724fd0b4b4a4b8ff5782290c8a9b8a78f2b5c7c20c4

Download .GZ

File Name: C4P5X_RMg5update_Internal_03.65.04.tar.gz

File size: 122.09 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: b5d08bdec53ae2a8657767d8b67acd60

SHA1: 5b9fc54152252eaedbd0a3185835534be6a0a259

SHA-256: 4c85830d0ff3d1aa01c4a724fd0b4b4a4b8ff5782290c8a9b8a78f2b5c7c20c4

Download .GZ

File Format: This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.

File Name: DSS9000_rack_fw_3.65.04_release_notes.pdf

File size: 330.03 KB

To ensure the integrity of your download, please verify the checksum value.

MD5: e536a6d069d04214d01a490fbe232bc6

SHA1: 0bfaa854b65481afbfe1b62ca8d1127e1d9261a7

SHA-256: ac516a9b7a7b5c078faef0391f61cbc4f9892da5b0c565803fcd1bb3dc6ad772

Download .PDF

Installation instructions

If you are updating the Pantera firmware over the Odin firmware, you need to follow below given steps.

Update via MC CLI

First update the MC firmware via MC CLI using folloing command.
load -source tftp:///MC_OP.d7 -install /

It will take few minutes to update and may report a failure.
Depending on the MC's current active partition the older Odin
firmware or the newer Pantera firmware will boot after update.

Note:
1) If the MC does not reboot automatically, DO NOT
REBOOT IT as this will cause data corruption.
- recovery from a corrupt state will require a serial console connection and performing a UBOOT recovery.

2) During this step all MC config files (mc.conf and manufacturing.conf) will get lost and newer firware will start with the default config files and MC is configured in DHCP.

Now you need to again update the same MC Pantera firmware via MC CLI using folloing command.
load -source tftp:///MC_OP.d7 -install /

After updating MC twice, you can now use the MC with Pantera firmware.

Update via UBOOT
Power on the MC Board and press "Enter" to enter in boot mode

First update the existing uboot using following command.
G5MC> util recover -i uboot1 -f /MC_BL.bin

On next auto reboot, again go into the boot mode by pressing "Enter".

Now update the MC firmware using following command.
G5MC> util recover -f /MC_OP.d7

It will upgrade MC with new Image.

Dell Product DSS9600/9620/9630 Rack firmware

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to