Dell Precision 3930 Rack System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

hi testing

Driver Id : D5DT3

Importance : Critical

Version : 2.4.1, 2.4.1 Latest version Recommended version Latest and Recommended version

Release Date : 03 Dec 2019

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel security advisories INTEL-SA-00241, INTEL-SA-00219, INTEL-SA-00220, INTEL-SA-00270, INTEL-SA-00260, INTEL-SA-00254, INTEL-SA-00240, and INTEL-SA-00164. A security advisory is a statement when a product is impacted by a security vulnerability and a remedy is available.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: Precision_3930_2.4.1.exe

File size: 11.66 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 914d0286e3ba31ec9f39aa99b78ec84c

SHA1: 0dfa4906648bd1030ccb2cead8759b8a2bc61aa5

SHA-256: 173f6bce3ef9bb347e6f8d757cf56f34af8e5cf9227dcfb18323e331f88d3e45

Download .EXE

File Format: This file format consists of a BIOS Recovery image file. This file is used for the System BIOS Recovery process to recover a system from a corrupted BIOS.

File Name: BIOS_IMG.rcv

File size: 11.66 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 914d0286e3ba31ec9f39aa99b78ec84c

SHA1: 0dfa4906648bd1030ccb2cead8759b8a2bc61aa5

SHA-256: 173f6bce3ef9bb347e6f8d757cf56f34af8e5cf9227dcfb18323e331f88d3e45

Download .RCV

Fixes & Enhancements

Fixes:
- Fixed a BIOS Setup configuration issue that occurs after clearing the CMOS.
- Removed the IpSec driver and application.
- Firmware updates to address security advisory INTEL-SA-00241 (CVE-2019-0169, CVE-2019-11105, CVE-2019-11104, CVE-2019-11103, CVE-2019-11090, CVE-2019-0165, CVE-2019-0168, CVE-2019-11087, CVE-2019-11101, CVE-2019-11106, CVE-2019-11108, CVE-2019-11147, CVE-2019-11088, CVE-2019-0131, CVE-2019-0166, CVE-2019-11100, CVE-2019-11107, CVE-2019-11086, CVE-2019-11132, and CVE-2019-11131)
- Firmware updates to address Intel security advisories INTEL-SA-00219 (CVE-2019-0117), INTEL-SA-00220 (CVE-2019-0123), and INTEL-SA-00270 (CVE-2019-11135).
- Firmware updates to address Intel security advisories INTEL-SA-00220 (CVE-2019-0124), INTEL-SA-00260 (CVE-2019-0154), and INTEL-SA-00254 (CVE-2019-0185).
- Fixed an issue with preboot TPM detection and error logging.
- Firmware updates to address Intel security advisories INTEL-SA-00240 (CVE-2019-0151) and INTEL-SA-00164 (CVE-2019-0184).

Enhancement:
- Supports AMD WX 3200 graphics card.
- Added a new feature to automatically suspend BitLocker before upgrading the firmware. After the firmware upgrade is complete, BitLocker is automatically enabled.
- Added an enhancement to extend the BIOS password configuration measurements into the TPM.

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

Installation
1. Copy the downloaded file to a USB drive. The USB drive does not need to be bootable device.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click Ok.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a progress bar at the Dell logo screen. The system restarts again when the update is complete.

Dell Precision 3930 Rack System BIOS

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to