Dell Latitude 5285 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : F1FYV

Importance : Critical

Version : 1.10.1, 1.10.1 Latest version Recommended version Latest and Recommended version

Release Date : 07 Oct 2020

Download Type : System BIOS

Category : BIOS

This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Technical Advisory INTEL-TA-00404 and Intel Security Advisories INTEL-SA-00260, INTEL-SA-00254, INTEL-SA-00219, INTEL-SA-00220, INTEL-SA-00270, INTEL-SA-00295, INTEL-SA-00322, INTEL-SA-00329. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: Latitude_5285_1.10.1.exe

File size: 12.98 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 16903bbafbffaaabe3fdc373a5fff367

SHA1: ca0873faca995c36eed46f9664014ad4bb764a66

SHA-256: 07519ca63aecad9765e9426af778f75b18f29ee6a63a903190c7dcdbe1345709

Download .EXE

Fixes & Enhancements

Fixes:
- Firmware updates to address the Intel Technical Advisory INTEL-TA-00404 (CVE-2020-8758).
- Firmware updates to address Intel security advisories INTEL-SA-00260 (CVE-2019-0154) and INTEL-SA-00254 (CVE-2019-0185).
- Firmware updates to address Intel security advisories INTEL-SA-00219 (CVE-2019-0117), INTEL-SA-00220 (CVE-2019-0123), and INTEL-SA-00270 (CVE-2019-11135).
- Firmware updates to address security advisory INTEL-SA-00295 (CVE-2020-0531, CVE-2020-0532, CVE-2020-0534, CVE-2020-0535, CVE-2020-0536, CVE-2020-0537, CVE-2020-0538, CVE-2020-0539, CVE-2020-0540, CVE-2020-0541, CVE-2020-0542, CVE-2020-0594, CVE-2020-0595, CVE-2020-0596, and CVE-2020-8674).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00322 (CVE-2020-0528 and CVE-2020-0529).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00320 (CVE-2020-0543).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00329 (CVE-2020-0548 and CVE-2020-0549).
- Firmware updates to address CVE-2020-5362.
- Fixed the issue where the SMM Security Mitigation gets disabled while loading BIOS defaults.
- Fixed an issue with the hard drive master password reset not functioning.
- Fixed the issue where the instruction to press the F7 key to stop showing the warning message again is missing from the warning message. This message is displayed in the SupportAssist when you connect WD19 Thunderbolt dock to a non-Thunderbolt port.

Enhancements:
- Updated the Power Delivery firmware.

Installation instructions

Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.

Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the file.
5. Click Yes to open the BIOS update utility.
6. Click Update to initiate the update process. A progress bar is displayed.
7. Click Restart to restart the system once the progress bar reaches 100%.
The update process initiates at the Dell logo and an update initiation message is displayed with a progress bar. After the update finishes, the system automatically restarts.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.

1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click Ok.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

Dell Latitude 5285 System BIOS

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to