Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: Inspiron_14_15_7000_Gaming_1.7.0.exe
File size: 6.61 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: 4004ea10d4045af071f7ae414c15275f
SHA1: 9835269b4867be4a0d2f16f43329a17785ada0aa
SHA-256: 6ce6a3cb455d31c3292a3ba5984cb2d0e1c6664d7498629235fd7c753938665d
Fixes & Enhancements
Fixes:
- Updated Intel ME Firmware to address security advisory INTEL-SA-00118(CVE-2018-3627)
- Updated CPU microcode to address security advisory Intel Security Advisory INTEL-SA-00115 (CVE-2018-3639 & CVE-2018-3640)
Enhancements:
- Not Applicable
Important Information
1. BIOS cannot be downgraded from current version updated.
Supported Operating Systems
Installation instructions
BIOS Update Executable for Windows/DOS
[Download]
1. Click "Download File", to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS utility from the DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 key and go to "Boot > Boot List Option".
3. Change "UEFI" to "Legacy" of Boot List Option.
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. DOS System will auto restart and update BIOS while system startup screen.
8. After BIOS update finished, system will auto reboot.
9. Go to BIOS Setup by pressing F2 key and go to "Boot > Boot List Option".
10. Change "Legacy" to "UEFI" Boot Option.
11. Go to "Exit > Exit Save Changes" and reboot system.
--------------------------------------------------------------------------------
Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it.