SUSE Linux Enterprise Server (SLES) 15 Service Pack 5 (SP5) Driver 8.8.2.0.0-1 for all Dell PERC H965 and H465 Controllers

######################Secure Boot Enablement######################
This release package contains signed binaries for RHEL. The drivers are signed with Broadcom owned public-private key pair.The Public Key provided in the file "DCSG00411462_selfcert". Please follow "Secureboot Certificate Installation.PDF" for informationon adding the signing certificate to your systems key Database.
############################ Enablement Inbox OS Drivers ############################
Enablement inbox drivers have been added to some OSes for initial launch of PERC12 controllers. These drivers are for OS install only and have limited performance and controller management functionality. Management Applications such as PERCCLI2 and OpenManage will not work with these drivers. Enablement drivers can be identified with version numbers "0.255.xxx.xxx", "3.xxx.xxx.xxx", or "8.0.0.xx.0". PERC12 driver "8.xxx.xxx.xxx" should be installed as soon as possible or applied during OS install to enable full performance and management functionality of PERC12 controllers.
############################Linux Driver BSG Changes############################
Starting with Linux driver version 8.4.2.0.0, the Linux BSG interface is being used instead of IOCTL. Older PERCcli2, DUP and OMSS Utilities will not work with the new drivers. Please downloadand use latest Utilities and DUPs with this release. If downgrade to older controller firmware is needed then manual update with latest PERCcli2 should be used.If issues are seen with latest utility releases please contact DELL support

Dell Update Package Instructions (Preferred)

Download
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

.tar Files Install Instructions:

The driver package is a compressed tar file.

To extract the components within the tar file, un-tar the files: # tar -xvzf

Extracted files should contain the following:
- driver rpm (broadcom-mpi3mr-kmp-default-8.4.4.0.0_sles15sp5-1.x86_64.rpm)
- source code (mpi3mr-8.4.4.0.0-1.src.rpm)

Updating the Driver:
1. Install the Driver package. Use the command appropriate for your distribution:
RHEL / SLES: rpm -Uvh


2. Verify the driver has been loaded with this system command:
# modinfo mpi3mr

The version shown in the output should match with the version of the package