ThinOS 8.6_013 English Raw Image file for Dell Wyse 5060 thin clients
Restart requiredhi testing
Driver Id : N8VMD
Importance : Recommended
Version : 8.6_013, 8.6_013 Latest version Recommended version Latest and Recommended version
Release Date : 21 Dec 2018
Download Type : Operating Systems
Category : Operating System
This package is supported on Dell Wyse 5060 thin clients and is intended for customers who want to install the ThinOS 8.6_013 English Raw image.
Download Files
File Name: OS_Web_v8.6_B013_5060_ENG.zip
File size: 242.58 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: e1dc8c7202ea84a458f9830fe1f3612b
SHA1: 87d4608e621aa7c1739ff704b58fe19f58a1e224
SHA-256: 173580b8f56dee5fa8deaa7bfe76e0fe5d31186a903ed76d36df97846eb5832a
Fixes & Enhancements
New features:
- Updated the Citrix RTME package to version 2.5.
- Added support for Cisco Jabber Softphone for VDI.
- Added support for Okta using Citrix NetScaler Gateway.
- Added support to create icon folders on the StoreFront desktop using the INI parameter.
- Updated the Horizon client version from 4.6 to 4.8.
- Added support for VMware Horizon Virtualization Pack for Skype for Business in VMware Blast session.
- Added support for hardware cursor in VMware Blast session.
- Ability to select displays when launching RDP connections in full screen mode.
- Added an option to set the desktop DPI scaling factor in RDP session.
- Added support to directly configure the PCoIP connection using Teradici Remote Workstation cards.
- Added support to update BIOS on Wyse 5060 and 3030 LT thin clients using Wyse Management Suite.
- Added support to extract and restore certain BIOS settings.
- UI enhancement to configure the IPv4 settings for a wireless connection.
- UI enhancement to allow user to connect to a remote host or device using the Telnet client.
- UI enhancement to verify the version of the installed packages and generate logs.
- UI enhancement on the Wyse Device Manager console to display the device details of peripheral devices connected to the ThinOS client.
- Added support for Caradigm Way2Care.
- Added support for Vertical Synchronization to eliminate screen tearing.
- Added new INI parameters.
- Updated the Citrix RTME package to version 2.5.
- Added support for Cisco Jabber Softphone for VDI.
- Added support for Okta using Citrix NetScaler Gateway.
- Added support to create icon folders on the StoreFront desktop using the INI parameter.
- Updated the Horizon client version from 4.6 to 4.8.
- Added support for VMware Horizon Virtualization Pack for Skype for Business in VMware Blast session.
- Added support for hardware cursor in VMware Blast session.
- Ability to select displays when launching RDP connections in full screen mode.
- Added an option to set the desktop DPI scaling factor in RDP session.
- Added support to directly configure the PCoIP connection using Teradici Remote Workstation cards.
- Added support to update BIOS on Wyse 5060 and 3030 LT thin clients using Wyse Management Suite.
- Added support to extract and restore certain BIOS settings.
- UI enhancement to configure the IPv4 settings for a wireless connection.
- UI enhancement to allow user to connect to a remote host or device using the Telnet client.
- UI enhancement to verify the version of the installed packages and generate logs.
- UI enhancement on the Wyse Device Manager console to display the device details of peripheral devices connected to the ThinOS client.
- Added support for Caradigm Way2Care.
- Added support for Vertical Synchronization to eliminate screen tearing.
- Added new INI parameters.
Important Information
Do not power off your thin client until the installation is complete.
Compatible Systems
Supported Operating Systems
ThinOS
Installation instructions
Installing an image by using FTP server:
1. Download the latest ThinOS firmware and latest ThinOS packages that corresponds to your thin client model. If the firmware and packages are in the form of a compressed self-extracting (.EXE) or zipped file (.ZIP), then extract the files.
Note: When you download the JVDI.zip package, the README WITH EULA.txt and JVDI.i386.pkg files are unzipped. Ensure that you open the readme file and read the EULA agreement.
2. Place the extracted firmware files in the C:\inetpub\ftproot\WYSE\wnos folder, and the packages to C:\inetpub\ftproot\WYSE\wnos\pkg on your FTP server.
3. Create a wnos.ini text file (using a text editor) in the C:\inetpub\ftproot\WYSE\wnos folder with the following INI parameters: Autoload=1 loadpkg=1 Addpkg=TCX,FR,horizon,JVDI
4. Save the wnos.ini file.
5. To locate the ftp File Servers/Path from Wyse 5060 thin client, do the following:
5.1. On the ThinOS client desktop, navigate to System Setup > Central Configuration > General.
5.2. In the General tab, enter the IP address of the FTP server or directory, username and password. If FTP server supports Anonymous, enter the username as Anonymous, and enter the pre-configured password. You can also leave the username and password fields blank.
5.3. Click OK.
6. Restart the thin client and wait until the auto-installation of packages is complete.
Installing an image by using Wyse Management Suite:
1. Download the ThinOS firmware file to a desired location or the Wyse Management Suite server.
2. Log in to Wyse Management Suite and navigate to the Apps and Data page.
3. Click OS Image Repository and select ThinOS.
4. Click Add Firmware File and browse the Firmware file. Provide an appropriate description and click Upload.
5. To update Group of devices, do the following:
5.1 Click Groups & Configs and select the group where the device is present.
5.2 Click Edit Policy-->ThinOS-->Advanced Configurations.
5.3 Click Firmware Upgrade and select Configure this item.
5.4 Select the Device Model and Firmware File.
5.5 Click Save & Publish.
6. To update a single device, do the following:
6.1 Go to the Devices page and click your preferred device.
6.2 On the Device Details page, click Create/ Edit Exceptions.
6.3 Click Advanced Configurations.
6.4 Click Firmware Upgrade and select Configure this item.
6.5 Select the Device Model and Firmware File.
6.6 Click Save & Publish.
Installing an image by using Wyse Device Manager (WDM):
1. To add device to the WDM server, on the ThinOS thin client, navigate to Desktop->Shutdown.
2. Select the Reset the system setting to factory defaults check box.
3. Select the Restart the system radio button, and click OK.
4. Log in to the WDM server after the ThinOS device is restarted.
5. Click Devices, and verify if the device is discovered and displayed on the Devices page in WDM.
6. Download the ThinOS file (Ex: ZD10_wnos) to C->inetpub->ftproot->Rapport->WTOSCONFIG->WNOS.
7. To configure the FTP server path for image upload, create the WNOS.ini file in C->inetpub->ftproot->Rapport->WTOSCONFIG->WNOS.
8. Create the INI parameters with the following values: SignOn=0 and autoload=1.
9. To allow WDM to use FTP when updating devices, log in to the WDM server with valid admin credentials.
10. Navigate to System-->WyseThinOS.
11. Enable the WTOS INI Path upon check-in settings.
12. Click the Save button to save the settings.
13. To allow the client to check in to the WDM server, on the ThinOS client, navigate to Desktop-> System Setup-> Central Configuration.
14. Click the WDA tab and then click the Protocol priority as WDM radio button.
15. Select all the Discovery Settings check boxes, such as DNS_NameRecord, DNS_SRVRecord and DHCP_Inform.
16. To set the FTP server path in ThinOS clients, click the General tab.
17. Enter a valid file servers/Path as configured (Ex:10.XXX.XXX.XXX/Rapport/WTOSCONFIG).
18. Click OK.
19. To initiate ThinOS image update, navigate to Desktop -> Shutdown.
1. Download the latest ThinOS firmware and latest ThinOS packages that corresponds to your thin client model. If the firmware and packages are in the form of a compressed self-extracting (.EXE) or zipped file (.ZIP), then extract the files.
Note: When you download the JVDI.zip package, the README WITH EULA.txt and JVDI.i386.pkg files are unzipped. Ensure that you open the readme file and read the EULA agreement.
2. Place the extracted firmware files in the C:\inetpub\ftproot\WYSE\wnos folder, and the packages to C:\inetpub\ftproot\WYSE\wnos\pkg on your FTP server.
3. Create a wnos.ini text file (using a text editor) in the C:\inetpub\ftproot\WYSE\wnos folder with the following INI parameters: Autoload=1 loadpkg=1 Addpkg=TCX,FR,horizon,JVDI
4. Save the wnos.ini file.
5. To locate the ftp File Servers/Path from Wyse 5060 thin client, do the following:
5.1. On the ThinOS client desktop, navigate to System Setup > Central Configuration > General.
5.2. In the General tab, enter the IP address of the FTP server or directory, username and password. If FTP server supports Anonymous, enter the username as Anonymous, and enter the pre-configured password. You can also leave the username and password fields blank.
5.3. Click OK.
6. Restart the thin client and wait until the auto-installation of packages is complete.
Installing an image by using Wyse Management Suite:
1. Download the ThinOS firmware file to a desired location or the Wyse Management Suite server.
2. Log in to Wyse Management Suite and navigate to the Apps and Data page.
3. Click OS Image Repository and select ThinOS.
4. Click Add Firmware File and browse the Firmware file. Provide an appropriate description and click Upload.
5. To update Group of devices, do the following:
5.1 Click Groups & Configs and select the group where the device is present.
5.2 Click Edit Policy-->ThinOS-->Advanced Configurations.
5.3 Click Firmware Upgrade and select Configure this item.
5.4 Select the Device Model and Firmware File.
5.5 Click Save & Publish.
6. To update a single device, do the following:
6.1 Go to the Devices page and click your preferred device.
6.2 On the Device Details page, click Create/ Edit Exceptions.
6.3 Click Advanced Configurations.
6.4 Click Firmware Upgrade and select Configure this item.
6.5 Select the Device Model and Firmware File.
6.6 Click Save & Publish.
Installing an image by using Wyse Device Manager (WDM):
1. To add device to the WDM server, on the ThinOS thin client, navigate to Desktop->Shutdown.
2. Select the Reset the system setting to factory defaults check box.
3. Select the Restart the system radio button, and click OK.
4. Log in to the WDM server after the ThinOS device is restarted.
5. Click Devices, and verify if the device is discovered and displayed on the Devices page in WDM.
6. Download the ThinOS file (Ex: ZD10_wnos) to C->inetpub->ftproot->Rapport->WTOSCONFIG->WNOS.
7. To configure the FTP server path for image upload, create the WNOS.ini file in C->inetpub->ftproot->Rapport->WTOSCONFIG->WNOS.
8. Create the INI parameters with the following values: SignOn=0 and autoload=1.
9. To allow WDM to use FTP when updating devices, log in to the WDM server with valid admin credentials.
10. Navigate to System-->WyseThinOS.
11. Enable the WTOS INI Path upon check-in settings.
12. Click the Save button to save the settings.
13. To allow the client to check in to the WDM server, on the ThinOS client, navigate to Desktop-> System Setup-> Central Configuration.
14. Click the WDA tab and then click the Protocol priority as WDM radio button.
15. Select all the Discovery Settings check boxes, such as DNS_NameRecord, DNS_SRVRecord and DHCP_Inform.
16. To set the FTP server path in ThinOS clients, click the General tab.
17. Enter a valid file servers/Path as configured (Ex:10.XXX.XXX.XXX/Rapport/WTOSCONFIG).
18. Click OK.
19. To initiate ThinOS image update, navigate to Desktop -> Shutdown.