Dell Precision Workstation T7610 System BIOS

Restart required

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Driver Id : T7PW8

Importance : Recommended

Version : A09, A09 Latest version Recommended version Latest and Recommended version

Release Date : 03 Feb 2015

Download Type : System BIOS

Category : BIOS

This package provides the Dell System BIOS update and is supported on Dell Precision T7610 for Windows and DOS Operating Systems.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: T7610A09.exe

File size: 8.58 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 9f8331ccc268dd502b73b3b60302638f

SHA1: 186ed042207cd97a2e05371daa2d05028729bfba

SHA-256: 9eaaacaf41d8bb166532918f912b3e916793cd74ed276641ab3b3d80ff7bee81

Download .EXE

Fixes & Enhancements

Fixes:
- Fixed PS/2 mouse has no function in the Option ROM control interface of LSI MegaRAID SAS 9271-8i card
- Fixed the system boot mode cannot be controlled by the Dell utility CCTK(Client Configuration Toolkit)
- Fixed there is no temperature reading in Dell ePSA (Enhanced Pre-Boot System Assessment) diagnostics
- Fixed lots of hardware error events are triggerd in Windows Event Viewer when USB3.0 PCI Express card is plugged
- Fixed the integrated NIC(Network Interface Card) cannot be disabled on the system without Intel MEBx(Management Engine BIOS Extension)
- Fixed System cannot flash BIOS after resuming from sleep
- Fixed PS/2 mouse loses function after resuming from Sleep on Windows 8.1

Enhancements:
- Enhanced BIOS security mechanism
- Enhanced the system performance
- Updated EC(Embedded Controller) firmware

Installation instructions

BIOS Update Executable for Windows/OS independent

Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.

Perform the BIOS update from the BIOS Boot Menu, independent of operating system.
1. Copy the downloaded file to a USB flash device. It does not need to be bootable.
2. Insert the USB flash device into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one time boot menu.
5. Select "BIOS Flash Update" in the "Other Options" section.
6. Click on the "..." button to browse the USB flash device to locate the downloaded file.
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected.
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update.
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed.
12. The system will restart once again when the Flash update is complete.

--------------------------------------------------------------------------------
Note 1: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system.
If you don't enable BitLocker on your system you can ignore it

Reboot will be required

Dell Precision Workstation T7610 System BIOS

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to