Intel Solid State Drive Firmware Update for SSDPE21D280GAD/SSDPE21D960GAD

Restart required

hi testing

Driver Id : 1PHPP

Importance : Critical

Version : D08N, A00 Latest version Recommended version Latest and Recommended version

Release Date : 18 Aug 2023

Download Type : Firmware

Category : Storage

This package contains the firmware for Intel SSDPE21D280GAD 280 GB and SSDPE21D960GAD 960 GB, Revision D08N. Storage firmware is a microcode that is embedded on storage devices such as hard drives or solid state drives. The firmware manages the functionality of the devices. This update addresses the Dell Security Advisories (DSA). A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

Download Files

File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.

File Name: Intel_SSDPE21D280GAD_SSDPE21D960GAD_1PHPP_ZPE.exe

File size: 3.68 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 83d4b4c7d5fb782377dd3b5f37806565

SHA1: b10a02dbc00bbd31a689060b0eec0dfec4cdc49f

SHA-256: 605423081853199ba6b9b7a7c15b0d12573a7487be2699b329d88186b5efb935

Download .EXE

Important Information

- It is recommended that you back up your data before performing this update. Do not interrupt your system during the firmware update process. Firmware update Installation time should take no longer than 1 minute.
- For IT admins, this update supports silent install. You can use Management Consoles or Dell tools such as Dell Command Update, SupportAssist, or Dell Business Client Catalog with Config Manager for silent installation.

Compatible Systems

5820 XL Tower

7820 XL Tower

7920 XL Tower

Alienware Area-51 R4 and R5

Alienware Area-51 Threadripper Edition R3 and R6

Alienware Area-51 Threadripper Edition R7

Alienware Aurora R7

Alienware Aurora R8

Precision 5820 Tower

Precision 7820 Tower

Precision 7920 Tower

Supported Operating Systems

Windows 11 ARM64

Windows 11 ARM64 S-Mode

Windows 11 S-Mode

Windows 11

Windows 10, 64-bit

Installation instructions

Dell Update Package Instructions

Note 1: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Note 2: Your system requires a restart after installing the firmware.

Download
1. Click Download File.
2. When the File Download window is displayed, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the information in the dialog window.
3. Download and install any prerequisites that are identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Note- If the Extract button is selected instead of Install, perform the following steps to complete the update:
a. Choose the extract location.
b. Close the Dell Update Package window.
c. From a command window, change directory to the location where files were extracted and run the following command: 25304113_WIN.EXE.
d. Follow the remaining prompts to perform the update.