INSTALLATO AUTOMATICAMENTEQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
This software contains the Windows NT4 driver for the DELL PERC 2, PERC 2/Si, PERC 3/Si, and PERC 3/Di controllers.
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Cerca supporto
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
Fixes/Enhancements ==================
-Filter driver checks Dispatch_Level before calling KeWaitForSingleObject avoid bugcheck 0xB8 -Modified unknown AIF handling to prevent Driver Verifier hang. -STATUS_INVALID_PARAMETER returned for requests with: Zero-length input buffer size.Invalid input buffer size, i.e. not the size of the expected structure. Invalid memory address for the input buffer.A null input buffer. -Deletes perc2hib reference in lower filter list rather than entire filter list via inf. -Corrected a major entry-point in the filter driver that Windows uses for major Plug-N-Play requests (IRP_MJ_PNP). This entry point was incorrectly passing the request to the next lower device in the device stack. -Deleted the section that removes the upper and lower filters. This section caused errors to be logged in the setupapi.log in Windows. -Added support for new vSCSI implementation
Dell Technologies consiglia di eseguire questo aggiornamento nel prossimo ciclo di aggiornamenti pianificato. L'aggiornamento contiene modifiche per preservare l’integrità generale del sistema. Inoltre, garantisce che il software di sistema resti aggiornato e compatibile con altri moduli di sistema (firmware, BIOS, driver e software) e includa nuove funzioni.
Formato file:Estrae file direttamente sul disco locale
Nome file:nta12drv.exe
Dimensioni file:167.08 KB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo formato di file è costituito da un archivio di file che possono essere decompressi in una directory sul disco rigido. L'installazione può essere quindi eseguita da tale directory.
This software code release requires all V2.8 components: firmware, device driver and management utilities. Using some components from previous releases may cause some unknown errors.
Driver Installation for Windows NT 4.0 ==============================================
To perform a fresh installation of the Windows NT device drivers for the controller, follow these steps:
1. Boot the system using the Windows NT 4.0 CD.
2. When the message: "Setup is inspecting your computer's hardware configuration" appears, press F6 immediately.
3. The Windows NT 4.0 Setup screen will appear, requesting input for additional adapters in the system. Press 'S' to specify an additional adapter.
4. A selection menu will appear. Scroll to "Other" and hit ENTER.
5. Insert the driver diskette and press ENTER when prompted.
6. The selection: "DELL PERC 2, 2/Si, 3/Si, 3/Di RAID CONTROLLERS" will appear, hit ENTER.
7. After the driver has loaded, press ENTER to continue the installation.
NOTE: Before you perform the upgrade, uninstall the Controller Management Software (FAST and the CLI). See the installation guide associated with your controller for instructions on how to uninstall the Controller Management Software.
To upgrade the Windows NT device drivers for the controller, follow these steps: 1. Follow this path from Start:
3. The system displays an "Install Driver" window. Select "Have Disk".
4. The system displays an "Install From Disk" window. The "Install Driver" window instructs you to insert the manufacturer's installation media into the drive and click < Ok>. In this case, insert the diskette that contains the NT device drivers for your controller
5. Enter the drive and location of the files. The default location on the diskette that contains the NT device drivers is: "a:\".
The system displays a message identifying the controller for which you want to upgrade the Windows NT device drivers. The message requests that you click the button.
6. The system displays "System Settings Change" and asks if you want to restart the computer. Press YES.