Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell G3 3500/G5 5500 System BIOS
Restart requiredOTOMATİK OLARAK YÜKLENDİBu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Security Advisory INTEL-SA-00295. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.
Dell G3 15 3500 ürününüze yönelik tüm sürücüleri görüntülemek için şu bölüme gidin:Sürücüler ve indirmeler.
Önerilen
Sürücünün mevcut en son sürümü yükleniyor...
Bu, sürücünün Dell onaylı en son sürümüdür
Bu, sürücünün Dell onaylı en son sürümü değildir
G3_3500_G5_5500_1.4.2.exe | 14.02 MB>
Bu indirmenin aygıtınızla uyumluluğunu kontrol etmek için bilgisayarınızın Servis Etiketini girin.
Dosya Biçimi:Windows/DOS için CPG BIOS Yürütülebilir Dosyası
Dosya Adı:G3_3500_G5_5500_1.4.2.exe
Dosya Boyutu:14.02 MB
Biçim Açıklaması
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
İndirme işleminizin bütünlüğünü sağlamak için lütfen sağlama toplamı değerini doğrulayın.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın.Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
- Firmware updates to address the Intel Security Advisory INTEL-SA-00295 (CVE-2020-0534, CVE-2020-0536, CVE-2020-0539, CVE-2020-0541, and CVE-2020-0542). - Fixed the issue where the system stops responding at the Dell logo screen. This issue occurs when you press F2 or F12 to enter the BIOS setup menu. - Fixed the issue where options such as Thermal Management and Battery Charge Configuration are not displayed. This issue occurs when the Lid Switch option is disabled in the BIOS setup menu.
Dell Technologies, bu önemli güncellemeyi mümkün olan en kısa sürede uygulamanızı kesinlikle önerir. Bu güncelleme, Dell sisteminizin işlevselliğini, güvenilirliğini ve kararlılığını iyileştirmeye yönelik kritik hata düzeltmeleri ve değişiklikler içerir. Ayrıca güvenlik düzeltmeleri ve başka özellik iyileştirmeleri de içerebilir.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation 1. Click Download File. 2. Click Save to save the file to your hard drive. 3. Browse to the location where you downloaded the file. 4. Double-click the new file. 5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off the power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation 1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive. 2. Insert the USB drive into any USB port. 3. Power on the system. 4. At the DELL logo screen, press F12 to access the one-time boot menu. 5. Select BIOS Flash Update in the Other Options section. 6. Click the ... button to browse the USB drive to locate the downloaded file. 7. Select the file and click OK. 8. Verify the existing system BIOS information and the BIOS update information. 9. Click Begin Flash Update. 10. Review the Warning message and click Yes to proceed with the update. The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.