Connectrix: How to apply TruFOS certificate to Brocade switch from SANnav UI

Summary: How to apply TruFOS certificate to Brocade switch from SANnav user interface.

Informații suplimentare

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.

Consultați alte resurse

Instructions

1. Click SANnav in the navigation bar, and then select Services > FOS Certificate Management.

2. Select TruFOS from the filter bar.

3. Choose one of the following options:

• To upload to all chassis, click the more button ( ) in the upper-right corner of the page, and click Apply TruFOS.
• To upload to one or more chassis, complete the following steps.
: a. Click the more button ( ) in the upper-right corner of the page, and click Bulk Select. A column of checkboxes displays to the left of the chassis names.
b. Select each chassis on which to apply a TruFOS Certificate, and click Actions > Apply TruFOS.

4. Browse to the TruFOS Certificate location.

5. Select apply, and click Open.
. The Applied TruFOS dialog displays and details the selected certificates to be mapped to the chassis.

6.Click Next. The Apply TruFOS message displays. The selected certificates are mapped to the chassis in the background.

"You can check the Events page to check the TruFOS Certificate installation status. The Chassis list page displays the updated TruFOS Expiration Date in 15 to 20 minutes."

7. Click Close to close the Apply TruFOS message. TruFOS successfully applied after 15-20 minutes.