Connectrix B-Series Firmware: FOS user authentication works but has no permissions when configuring authentication
Shrnutí: While configuring the Brocade switch for tacacs+ user authentication. User is then pointing to a tacacs+ server application called tacacs.net. User authentication passes but user is unable to run any commands. ...
Tento článek se vztahuje na
Tento článek se nevztahuje na
Tento článek není vázán na žádný konkrétní produkt.
V tomto článku nejsou uvedeny všechny verze produktu.
Pokyny
Symptom: User logs in correctly but has no user permissions to run any commands.
Root Cause: tacacs.net application does not have the concept of Brocade SAN switch user roles which are needed to configure user roles such as admin role, etc. tacacs.net server is a proxy to a back-end LDAP server but the application is unable to "see" the user roles defined on the switch since ldapcfg --maprole cannot be used for tacacs+ configuration.
Workaround: User can use locally-defined user accounts or use LDAP protocol directly.
Resolution: Customer using non-support/non-tested tacacs.net app. Not a Brocade issue.
Root Cause: tacacs.net application does not have the concept of Brocade SAN switch user roles which are needed to configure user roles such as admin role, etc. tacacs.net server is a proxy to a back-end LDAP server but the application is unable to "see" the user roles defined on the switch since ldapcfg --maprole cannot be used for tacacs+ configuration.
Workaround: User can use locally-defined user accounts or use LDAP protocol directly.
Resolution: Customer using non-support/non-tested tacacs.net app. Not a Brocade issue.
Dotčené produkty
ConnectrixProdukty
Connectrix B-Series HardwareVlastnosti článku
Číslo článku: 000022769
Typ článku: How To
Poslední úprava: 07 led 2026
Verze: 4
Najděte odpovědi na své otázky od ostatních uživatelů společnosti Dell
Služby podpory
Zkontrolujte, zda se na vaše zařízení vztahují služby podpory.