ECS: Dial Home - EKMServerConnectionStatus - Symptom Code: 1369 and 1370

Shrnutí: This is a dial home was introduced to detect the EKMServerConnectionStatus alert.

Tento článek se vztahuje na Tento článek se nevztahuje na Tento článek není vázán na žádný konkrétní produkt. V tomto článku nejsou uvedeny všechny verze produktu.
Podívejte se na další zdroje

Příznaky

ECS has dialed home with the following alert:
SymptomCode Severity
1369 WARNING
1370 ERROR 
<?xml version="1.0" encoding="UTF-8"?>
<ConnectHome SchemaVersion="1.0.8"
    xsi:schemaLocation="/opt/connectemc/schema/ema_ConnectHome108.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <TransType>10</TransType>
    <TransTypeDesc>EventXML</TransTypeDesc>
    <TransID>0</TransID>
    <Node Status="Unknown" State="Unknown" ID="ECSQE00079">
        <Identifier>
            <DeviceState>1</DeviceState>
            <DeviceStatus>1</DeviceStatus>
            <ClarifyID>ECSQE00079</ClarifyID>
            <SiteName>UNKNOWN</SiteName>
            <Vendor>EMC</Vendor>
            <DeviceType>ElasticCloudStorageApp</DeviceType>
            <Model>ElasticCloudStorage</Model>
            <SerialNumber>ECSQE00079</SerialNumber>
            <WWN>ECSQE00079</WWN>
            <Platform>platform</Platform>
            <OS>SLES</OS>
            <OS_VER>12.3</OS_VER>
            <UcodeVer>3.3.0.0-4349.d0de882</UcodeVer>
            <EmbedLevel>2</EmbedLevel>
            <InternalMaxSize>512800</InternalMaxSize>
            <Comment>Object Alert</Comment>
        </Identifier>
        <Connection>
            <ConnectType>ESRS</ConnectType>
            <IPName>xxxxx-yyyyyy.ecs.lab.fqdn.com</IPName>
            <ConnectNum>xx.xxx.xxx.xx</ConnectNum>
            <Port>22</Port>
        </Connection>
        <HeartBeat>
            <HBStatus></HBStatus>
            <HBState></HBState>
        </HeartBeat>
        <InternalData>
            <FileList/>
            <EventList>
                <Event>
                    <SymptomCode>1370</SymptomCode>
                    <Category>Configuration</Category>
                    <Severity>Error</Severity>
                    <Status>Unknown</Status>
                    <Component>Object</Component>
                    <ComponentID></ComponentID>
                    <SubComponent>EKM Server Connection Status</SubComponent>
                    <SubComponentID></SubComponentID>
                    <CallHome>true</CallHome>
                    <FirstTime>2022-01-29T07:32:09.718Z</FirstTime>
                    <LastTime>2022-01-29T07:32:09.718Z</LastTime>
                    <Count>0</Count>
                    <EventData><![CDATA[]]></EventData>
                    <Description><![CDATA[The EKM Server: ecs-test-keysecure-xx.xxx.xxx.xxx is not responding. Please ensure that the server is connected.  [Ref_ID : EKMServerConnectionStatus]]]></Description>
                </Event>
            </EventList>
        </InternalData>
        <ExternalFiles/>
    </Node>
</ConnectHome>

Příčina

The Extensible Key Management (EKM) Server is not responding. Ensure that the server is connected.

Řešení

Verify status

Command:  
svc_rest_cmd -i `hostname -i` /vdc/sensor/status/EKMServerConnectionStatus
Example: 
# svc_rest_cmd -i `hostname -i` /vdc/sensor/status/EKMServerConnectionStatus
svc_rest_cmd 1.0.10

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<SensorStatusList>
  <SensorId>KMServerConnectionStatus</SensorId>
  <ListSensorStatus>
    <SensorStatusRestRep>
      <ContextId>EKMServerConnectionStatus</ContextId>
      <CurrentState>OK</CurrentState>
      <NodeId>1f4368c3-37cd-467f-9efc-289264806ea0</NodeId>
      <PreviousState>OK</PreviousState>
      <Time>1551118064264</Time>
    </SensorStatusRestRep>
  </ListSensorStatus>
Look for CurrentState as above, if set to OK the error can be ignored. If it is not OK (Warning or Error), proceed with the troubleshooting steps below.

Troubleshooting

Find the server indicated in the alert message received and try to ping it: 
Description><![CDATA[The EKM Server: ecs-dev-keysecure-xx.xxx.xx.xxx is not responding. Please ensure that the server is connected. [Ref_ID : EKMServerConnectionStatus]]]></Description>
Check resourcesvc.log for messages about the problem EKM server:
Command: 
grep /opt/emc/caspian/fabric/agent/services/object/main/log/<EKM Server Name> resourcesvc.log
Example: 
The command will return output in the following format:
There was some error verifying connection to EKMServer {will have failed server name} in cluster. {will have failure detail}
The errors indicate a possible network issue in the environment. Communication between ECS and the EKM server might be blocked, or the EKM server itself might be unavailable. Verify that ECS can ping the EKM server and advise the user to verify that the EKM server is functional.

If unable to resolve the issue, open a service request with ECS support to assist with the information gathered above.

Dotčené produkty

ECS, ECS Appliance, ECS Software, Elastic Cloud Storage
Vlastnosti článku
Číslo článku: 000038620
Typ článku: Solution
Poslední úprava: 17 pro 2025
Verze:  7
Najděte odpovědi na své otázky od ostatních uživatelů společnosti Dell
Služby podpory
Zkontrolujte, zda se na vaše zařízení vztahují služby podpory.