ECS：服务控制台：IP 地址更改后出现“Static routes validation'failed”（静态路由验证失败）

Shrnutí: 服务控制台：IP 地址更改后出现“Static routes validation'failed”（静态路由验证失败）

Tento článek se vztahuje na Tento článek se nevztahuje na Tento článek není vázán na žádný konkrétní produkt. V tomto článku nejsou uvedeny všechny verze produktu.
Podívejte se na další zdroje

Příznaky

IP 地址已更改。

更改后，服务控制台运行状况检查失败，并显示错误 “静态路由验证失败”。 
20200205 17:23:52.703: |   Static routes validation
INFO: On node 1XX.2XX.1.1 NAN managed static routes configured for networks: ['mgmt']
20200205 17:23:54.563: |   | FAIL (1 sec)
[ERROR] 'Static routes validation' failed: [1XX.2XX.1.1]: Command failed: 'sshpass ssh -q -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o ServerAliveInterval=30  -T  root@1XX.2XX.1.1 $'(1>&2 echo connect7); wicked ifstatus public.mgmt 2>&1' < /dev/null'
Output:
public.mgmt     device-not-running
      link:     #10, state up, mtu 1500
      type:     vlan public[1474], hwaddr a4:bf:01:1f:c3:ea
      config:   compat:suse:/etc/sysconfig/network/ifcfg-public.mgmt
      leases:   ipv4 static failed
      leases:   ipv6 auto granted
      addr:     ipv4 10.1.2.3/24 [static]
      route:    ipv4 10.4.5.6/27 via 10.1.2.1 [static]
      route:    ipv4 10.4.5.7/27 via 10.1.2.1 [static]
      route:    ipv6 default via fe80::218:74ff:fe1c:8640 metric 1024 proto ra
 
在上面的示例中，启用了 public.mgmt 的网络分离的 IP 地址已更改。

该接口的 wicked ifstatus 显示 设备未运行。

要进行检查，请运行以下命令 - 租约显示：ipv4 static failed 
viprexec -if ~/VDCLIST wicked ifstatus <interface name> |grep <interface name> -A 4

admin@node-a:~> viprexec -if ~/VDCLIST wicked ifstatus public.mgmt |grep public.mgmt -A 4
Output from host : 1XX.2XX.1.1
public.mgmt     device-not-running
      link:     #10, state up, mtu 1500
      type:     vlan public[1474], hwaddr a4:bf:01:1f:c3:ea
      config:   compat:suse:/etc/sysconfig/network/ifcfg-public.mgmt
      leases:   ipv4 static failed
Output from host : 1XX.2XX.1.2
public.mgmt     device-not-running
      link:     #10, state up, mtu 1500
      type:     vlan public[1474], hwaddr a4:bf:01:1f:c3:eb
      config:   compat:suse:/etc/sysconfig/network/ifcfg-public.mgmt
      leases:   ipv4 static failed
Output from host : 1XX.2XX.1.3
public.mgmt     device-not-running
      link:     #10, state up, mtu 1500
      type:     vlan public[1474], hwaddr a4:bf:01:1f:c3:ec
      config:   compat:suse:/etc/sysconfig/network/ifcfg-public.mgmt
      leases:   ipv4 static failed
Output from host : 1XX.2XX.1.4
public.mgmt     device-not-running
      link:     #10, state up, mtu 1500
      type:     vlan public[1474], hwaddr a4:bf:01:1f:c3:ed
      config:   compat:suse:/etc/sysconfig/network/ifcfg-public.mgmt
      leases:   ipv4 static failed

Příčina

静态路由在 public.mgmt 接口上配置。

Řešení

运行以下命令以查看静态路由：    
getrackinfo -t

admin@node-a:~> getrackinfo -t
Static route list
=================
Node ID      Network            Netmask                  Gateway           Interface     
1                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
1                  11.2.3.4             255.255.255.0     11.2.3.1            public.mgmt
2                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
2                  11.2.3.4             255.255.255.0     11.2.3.1            public.mgmt
3                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
3                  11.2.3.4             255.255.255.0     11.2.3.1            public.mgmt
4                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
4                  11.2.3.4             255.255.255.0     11.2.3.1            public.mgmt
在上面的示例中，假设 10.1.2.23 是作为 Secure Remote Services （SRS） 网关的旧路由，而新路由是 11.2.3.4。

现在，它无法在旧路由就位的情况下重新激活邪恶接口。必须先删除路由。

警告：在删除之前，请务必验证没有生产流量通过此路由运行。删除错误的路由可能会导致 DU。在删除任何路由之前，请获得执行此更改的权限！

商定后，删除旧路由。

可以一次删除一个路由，也可以通过创建包含所有命令的文件来删除路由。命令为：     
sudo setrackinfo --static-route-del <node id> <destination> <netmask> <gateway> <interface>
或者，直接从 getrackinfo -t

的输出中复制和粘贴。例如，创建一个文件：     
vi delete-old-routes
输入要执行以下操作的路由列表：     
sudo setrackinfo --static-route-del 1                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
sudo setrackinfo --static-route-del 2                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
sudo setrackinfo --static-route-del 3                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
sudo setrackinfo --static-route-del 4                  10.1.2.23            255.255.255.224   10.1.2.1            public.mgmt
保存文件并使其可执行：     
chmod +x delete-old-routes
运行文件：     
./delete-old-routes
Wicked 接口现在应更改为 up： 
viprexec -if ~/VDCLIST wicked ifstatus <interface name> |grep <interface name> -A 1
viprexec -if ~/VDCLIST wicked ifstatus public.mgmt |grep public.mgmt -A 1
Output from host : 1XX.2XX.1.1
public.mgmt     up
Output from host : 1XX.2XX.1.2
public.mgmt     up
Output from host : 1XX.2XX.1.3
public.mgmt     up
Output from host : 1XX.2XX.1.4
public.mgmt     up

Dotčené produkty

ECS Appliance

Produkty

ECS Appliance, ECS Appliance Hardware Series, ECS Appliance Software with Encryption, ECS Appliance Software without Encryption
Vlastnosti článku
Číslo článku: 000058102
Typ článku: Solution
Poslední úprava: 26 dub 2024
Verze:  4
Najděte odpovědi na své otázky od ostatních uživatelů společnosti Dell
Služby podpory
Zkontrolujte, zda se na vaše zařízení vztahují služby podpory.