NetWorker: 시스템 재부팅 모범 사례
Shrnutí: 재부팅하기 전에 NetWorker 서비스를 수동으로 중지하는 것이 좋습니다. NetWorker에는 여러 데이터베이스가 있으므로 서버를 재부팅할 때마다 운영 체제가 종료되기 전에 NetWorker 서비스를 제대로 중지해야 합니다. 부적절한 종료는 데이터베이스 손상, 작업 응답 중지, 일반적인 서버 불안정 등 예측할 수 없는 결과를 초래할 수 있습니다. 이 작업을 수행하는 가장 신뢰할 수 있는 방법은 NetWorker 서비스를 수동으로 중지하고 재부팅 전에 중지되도록 하는 것입니다. ...
Pokyny
NetWorker에는 여러 데이터베이스가 있으므로 서버를 재부팅할 때마다 운영 체제가 종료되기 전에 NetWorker 서비스를 수동으로 중지하는 것이 좋습니다. 이렇게 하면 작업이 완전히 종료되고 NetWorker 데이터베이스에 대한 연결이 닫힙니다.
Windows 시스템
Windows 관리자로서 다음 단계를 수행하여 NetWorker 서버, 스토리지 노드 및 클라이언트에서 서비스를 중지합니다.2. Services and Applications를 확장한 다음 Services를 선택합니다.
3. NetWorker Remote Exec Service를 마우스 오른쪽 버튼으로 클릭한 다음 Stop을 선택합니다.
참고: NetWorker Server에서 NetWorker Remote Exec Service는 NetWorker Backup and Recovery 및 NetWorker Message Queue Adaptor 서비스를 중지합니다. NMC 서버에서 NetWorker Remote Exec Service를 중지하면 EMC GST Service도 중지됩니다.
또는 관리 명령 프롬프트에서 이 작업을 수행할 수도 있습니다. net stop nsrexecd /y
참고: nsrexecd(NetWorker Remote Exec) 서비스를 중지하면 Windows 시스템에서 다른 모든 NetWorker 서비스가 중지됩니다.
C:\Windows\system32>net stop nsrexecd /y
The following services are dependent on the NetWorker Remote Exec Service service.
Stopping the NetWorker Remote Exec Service service will also stop these services.
NetWorker Snapshot Management Service
NetWorker Backup and Recover Server
NetWorker Message Queue Adaptor
EMC GST Service
The NetWorker Snapshot Management Service service is stopping.
The NetWorker Snapshot Management Service service was stopped successfully.
The NetWorker Backup and Recover Server service was stopped successfully.
The NetWorker Message Queue Adaptor service was stopped successfully.
The EMC GST Service service was stopped successfully.
The NetWorker Remote Exec Service service was stopped successfully.
4. Windows 서비스 창에서 또는 tasklist 명령을 사용하여 NetWorker 서비스가 중지되었는지 확인합니다.
tasklist | findstr nsr tasklist | findstr gst
로그:
NetWorker 클라이언트, 스토리지 노드 및 서버 서비스 로그의 기본 위치는 다음과 같습니다. C:\Program Files\EMC NetWorker\nsr\logs\daemon.raw
NetWorker Management Console 서버의 기본 서비스 로그 위치는 다음과 같습니다. C:\Program Files\EMC NetWorker\Management\gst\logs\gstd.raw
.raw 로그는 로그 디렉토리에서 nsr_render_log daemon.raw > daemon.log 2<&1 명령을 사용하여 렌더링할 수 있습니다.
Linux 시스템
루트 사용자로 다음 단계를 수행하여 NetWorker 서버, 스토리지 노드 또는 클라이언트에서 NetWorker 프로세스를 중지합니다.b. systemd가 활성화된 Linux 시스템에서 다음을 입력합니다. systemctl stop networker
NMC(NetWorker Management Console) 서버에서 다음 명령을 실행하여 NMC 서비스를 중지하고 NMC 데이터베이스를 닫습니다.
1. NMC 프로세스를 중지하려면 다음을 따르십시오.
a. sysVinit가 활성화된 Linux 시스템에서 다음을 입력합니다. /etc/init.d/gst stop
b. systemd가 활성화된 Linux 시스템에서 다음을 입력합니다. systemctl stop gst
2. NMC 서비스가 중지되었는지 확인하려면 ps -ef | grep gst를 입력합니다.
Mac OS X
2. NetWorker 프로세스를 중지하려면 다음 명령을 입력합니다.
참고: launchd 데몬/에이전트 관리자가 NetWorker 프로세스를 제어하며, NetWorker는 백그라운드에서 호스트에서 계속 실행되도록 프로세스를 구성합니다. 정상적인 작동 조건에서는 NetWorker 프로세스를 수동으로 중지하고 시작하지 않는 것이 좋습니다.
로그:
NetWorker 클라이언트, 스토리지 노드 및 서버 서비스 로그의 기본 위치는 다음과 같습니다. /nsr/logsdaemon.raw
NetWorker Management Console 서버의 기본 서비스 로그 위치는 다음과 같습니다. /opt/lgtonmc/logs/gstd.raw
.raw 로그는 로그 디렉토리에서 다음 명령을 사용하여 렌더링할 수 있습니다.nsr_render_log daemon.raw > daemon.log 2<&1