MD Series: SMCLI Commands for the Controller

Zusammenfassung: SMCLI Commands for the MD-Storage-Controller

Dieser Artikel gilt für Dieser Artikel gilt nicht für Dieser Artikel ist nicht an ein bestimmtes Produkt gebunden. In diesem Artikel werden nicht alle Produktversionen aufgeführt.
Andere Ressourcen ansehen

Symptome

You will find the description how to change management IP; rename the system; set or change the password; enable Telnet and restart the Controller.

Ursache

-

Lösung

Controller - change management IP
  1. Open a command line on the server or management station where the Modular Disk Storage Manager (MDSM) is installed.
  2. Change into the folder: C:\Programme\Dell\MD Storage Software\MD Storage Manager\client\
  3. Enter the following command (please do not copy):
    • smcli XXX.XXX.XXX.XXX YYY.YYY.YYY.YYY -p PASSWORD -c "set controller [0] ethernetPort [1] IPv4Adresse=ZZZ.ZZZ.ZZZ.ZZZ;"
      • XXX.XXX.XXX.XXX = Management IP 1
      • YYY.YYY.YYY.YYY = Management IP 2
      • ZZZ.ZZZ.ZZZ.ZZZ = New Management-IP
  4. After that the command is confirmed and executed. If you have not set a password, you can simply omit the string "-p PASSWORD".

Controller - rename system
  1. Open a command line on the server or management station where the Modular Disk Storage Manager (MDSM) is installed.
  2. Change into the folder: C:\Programme\Dell\MD Storage Software\MD Storage Manager\client\
  3. Enter the following command (please do not copy):
    • smcli XXX.XXX.XXX.XXX YYY.YYY.YYY.YYY -p PASSWORD -c "set storageArray userLabel=\"MD3200\";"
      • XXX.XXX.XXX.XXX = Management IP 1
      • YYY.YYY.YYY.YYY = Management IP 2
  4. After that the command is confirmed and executed. If you have not set a password, you can simply omit the string "-p PASSWORD".

Controller - set / change password
  1. Open a command line on the server or management station where the Modular Disk Storage Manager (MDSM) is installed.
  2. Change into the folder: C:\Programme\Dell\MD Storage Software\MD Storage Manager\client\
  3. Enter the following command (please do not copy):
    • smcli XXX.XXX.XXX.XXX YYY.YYY.YYY.YYY -p PASSWORD -c "set storage Array password=\"PASSWORD\";"
      • XXX.XXX.XXX.XXX = Management IP 1
      • YYY.YYY.YYY.YYY = Management IP  
  4. After that the command is confirmed and executed. If you have not set a password, you can simply omit the string "-p PASSWORD". If you have one set please enter the "old" password.

Controller - Telnet Enable
  1. Open a command line on the server or management station where the Modular Disk Storage Manager (MDSM) is installed.
  2. Change into the folder: C:\Programme\Dell\MD Storage Software\MD Storage Manager\client\
  3. Enter the following command (please do not copy):
    • smcli XXX.XXX.XXX.XXX YYY.YYY.YYY.YYY -p PASSWORD -c "set controller [Q] rloginEnabled=TRUE;"
      • XXX.XXX.XXX.XXX = Management IP 1
      • YYY.YYY.YYY.YYY = Management IP 2
      • ​​​​​​Q = Controller on which it should be activated  (0 or 1) 
  4. After that the command is confirmed and executed. If you have not set a password, you can simply omit the string "-p PASSWORD".

Controller - Restart
  1. Open a command line on the server or management station where the Modular Disk Storage Manager (MDSM) is installed.
  2. Change into the folder: C:\Programme\Dell\MD Storage Software\MD Storage Manager\client\
  3. Enter the following command (please do not copy):
    • smcli XXX.XXX.XXX.XXX YYY.YYY.YYY.YYY -p PASSWORD -c "reset controller [0];"
      • XXX.XXX.XXX.XXX = Management IP 1
      • YYY.YYY.YYY.YYY = Management IP 2
      • [0] = 0 for Controller 0 or 1 for Controller 1 
  4. After that the command is confirmed and executed. If you have not set a password, you can simply omit the string "-p PASSWORD".

Betroffene Produkte

PowerVault MD3000, PowerVault MD3000i, PowerVault MD3200, PowerVault MD3200i, PowerVault MD3220, PowerVault MD3220i, PowerVault MD3260, PowerVault MD3260i, PowerVault MD3400, PowerVault MD3420, PowerVault MD3460, PowerVault MD3600F , PowerVault MD3600i, PowerVault MD3620F, PowerVault MD3620i, PowerVault MD3660f, PowerVault MD3660i, PowerVault MD3800f, PowerVault MD3800i, PowerVault MD3820f, PowerVault MD3820i, PowerVault MD3860f, PowerVault MD3860i ...
Artikeleigenschaften
Artikelnummer: 000124598
Artikeltyp: Solution
Zuletzt geändert: 03 Nov. 2022
Version:  5
Antworten auf Ihre Fragen erhalten Sie von anderen Dell NutzerInnen
Support Services
Prüfen Sie, ob Ihr Gerät durch Support Services abgedeckt ist.