PowerStore: RUN SYSTEM CHECK From PowerStore Manager May Not Complete with the Error "Fireman Command Failed"
Zusammenfassung: RUN SYSTEM CHECK from PowerStore Manager may not complete with the error "Fireman command failed. (0xE0F010200004)
Dieser Artikel gilt für
Dieser Artikel gilt nicht für
Dieser Artikel ist nicht an ein bestimmtes Produkt gebunden.
In diesem Artikel werden nicht alle Produktversionen aufgeführt.
Symptome
This error is indicated with the message as shown below:
Figure 1: Screenshot of error message "Fireman command failed"
Fireman command failed. (0xE0F010200004)
Figure 1: Screenshot of error message "Fireman command failed"
Ursache
For some PowerStore systems running operating system 3.2.x or earlier, the default time of 360 seconds for the System Check is not sufficient to complete checks. This is causing the health check job to fail.
Lösung
Workaround:
- Use the following service command from the service container to check the results of the health check.
svc_health_check run
- If any of the checks are reported as failed, resolve the condition of the failed check.
- Run the following service command again to check that all tests have passed and then proceed.
svc_health_check run
NOTE: This issue is addressed in PowerStoreOS 3.5.0 by increasing the Health Check timeout value initiated by PowerStore Manager from 360 to 600 seconds.
Betroffene Produkte
PowerStoreArtikeleigenschaften
Artikelnummer: 000219217
Artikeltyp: Solution
Zuletzt geändert: 15 Nov. 2023
Version: 2
Antworten auf Ihre Fragen erhalten Sie von anderen Dell NutzerInnen
Support Services
Prüfen Sie, ob Ihr Gerät durch Support Services abgedeckt ist.