Isilon PowerScale: Reimage process fails with stop boot condition reached

When reimaging an Isilon or PowerScale node, a message similar to this is displayed:
 

Unable to pull files from None backup
Installation config method is PSF: Unable to pull secondary backup files
Installation config method is PSF: Copying PSI config files
Unable to /sbin/mount /dev/mirror/mfg on /mfg
PSF file path /mfg/psi/psf.json unmounted primary backup; mount attempt failed
stop_boot condition reached, but OneFS install flag set. Aborting.
Failed to copy PSI config files: Chassis is missing a PSI receipt.
A receipt must be provided before the boot will be allowed to continue.
[: -ne: unexpected operator
eval: cannot create /opt/dell/srvadmin/iSM/etc/ini/software-package.ini: No such file or directory
eval: cannot create /opt/dell/srvadmin/iSM/etc/ini/software-package.ini: No such file or directory
eval: /opt/dell/srvadmin/iSM/bin/Invoke-iSMPKIHelper: not found
Starting background file system checks in 60 seconds.

Thu Mar 28 21:44:58 GMT 2024


Isilon OneFS/amd64 (isi-bsd) (ttyu0)



login:

Log in to the operating system with the username of root and password of a then run:
 

fsck -y -t ufs /dev/mirror/*

If the command indicates it has repaired any of the mirrors, re-run the command. Continue to re-run the command until the mirrors report no changes.

Once the mirrors are marked as clean, reboot the node and the reimage process should complete. If the reimage process continues to have issues, contact support.