NetWorker: How to read Data Domain statistics for a NetWorker save set

Summary: Use mminfo to extract deduplication statistics for a NetWorker save set on a Data Domain; the output follows version:cloneid:backup:pre‑compression:post‑compression and shows deduplicate compression process. ...

Αυτό το άρθρο ισχύει για Αυτό το άρθρο δεν ισχύει για Αυτό το άρθρο δεν συνδέεται με κάποιο συγκεκριμένο προϊόν. Δεν προσδιορίζονται όλες οι εκδόσεις προϊόντων σε αυτό το άρθρο.
Δείτε άλλους πόρους

Instructions

The NetWorker media database stores the metadata for a NetWorker save set. This metadata includes the deduplication (dedupe) statistics for the save sets written to Data Domain devices.

There are two ways to display detailed deduplication statistics for a save set from the NetWorker media database:

mminfo -q ssid=save-set-id -S
This shows the save set's metadata statistics.
Or
mminfo -q ssid=save-set-id -r attrs
This shows the save set's deduplication (dedupe) details; other columns can be added as needed.


How to read the Data Domain dedup statistics: 

<version>:<cloneid>:<backup size>:<pre local compression size>:<post local compression size>


For Example:

On the NetWorker server: 

# mminfo -q "ssid=3190711499" -r "ssid,sumsize,totalsize"
ssid         size      total
3190711499   49 MB   50655224
 
# mminfo -q "ssid=3190711499" -S
ssid=3190711499 savetime=10/03/2014 10:02:55 AM (1412326975) vm-lego-231:/etc
 
*ss data domain backup cloneid: 1412326975;
*ss data domain dedup statistics: "v1:1412326975:50823364:1625378:738007";

On the Data Domain:

# filesys show compression "/data/col1/vm-lego-121/onetwoone/82/42/f7e023b6-00000006-be2e64cb-542e64cb-00435000-637ca656"
Total files: 1;  bytes/storage_used: 68.3
 Original Bytes:                 50,824,052              - raw bytes
 Globally Compressed:            1,626,066               - pre_lc_size
 Locally Compressed:             738,201                 - post_lc_size
 Meta-data:                      5,528

For this save set:

cloneid                          :  1412326975
backup size                      :   50823364
pre local-compression size       :   1625378
post local-compression size      :   738007


The Data Domain performs inline deduplication which accounts for the difference between the initial backup size and the 'pre local-compression size' also known as the 'Globally Compressed' size. This deduped data is then compressed.

For a complete explanation of this process, refer to the following article: Data Domain: Understanding Data Domain Compression

Additional Information

The following demonstrates how to identify NetWorker data directly on the Data Domain file system:

NetWorker Server:

  1. From an elevated prompt on the NetWorker server, use the mminfo command to identify a NetWorker save set:
[root@nsr ~]# mminfo -avot
 volume        type   client           date     time         size ssid      fl   lvl name
...
nsr.amer.lan.dddefault.001 Data Domain rhel-client03.amer.lan 05/04/2026 09:40:20 AM 10 GB 3673727428 cb full /
...
    NOTE: for additional information about the mminfo command, see the NetWorker Command Reference Guide. NetWorker documentation is available under: Support for NetWorker | Manuals & Documents (you must sign in with your Dell support account).
    1. Using the save set ID, use the following command to get the long-save set ID and device name:
    mminfo -q ssid=SSID -r "ssid(55),device)"
    Example:
    [root@nsr ~]# mminfo -avot -q ssid=3673727428 -r "ssid(55),device"
 ssid                                                  device
62f4ba32-00000006-daf8a1c4-69f8a1c4-00275000-592bbe56  ddve01.amer.lan_BackupDevice01

    The file path on the Data Domain uses the NetWorker "long" save set ID (SSID). 

    Data Domain:

    1. Open a sysadmin SSH session on the Data Domain.
    NOTE: Depending on the options chosen and the amount of data on the Data Domain, the output may exceed the session buffer. It is recommended to enable SSH session logging to log the output to a file. For example:

    Enabling putty session logging

    1. From the prompt, list the mtrees on the Data Domain:
    mtree list
    1. Using the NetWorker server mtree, generate a Data Domain filesys report:
    filesys report generate file-location path </data/col1/NETWORKER_MTREE>

    This lists all save sets from the NetWorker server, optionally, you can use the device path from the NetWorker devices "Device Access Information" field:

    filesys report generate file-location path /data/col1/<NETWORKER_MTREE>/<DEVICE_FOLDER>
    For example, for the save set shown on the NetWorker server:
    sysadmin@ddve01# filesys report generate file-location path /data/col1/nsr/BackupDevice01
--------------------------------      ----------------------      -------------     -----------------
File Name                             Location(Unit Name)         Size              Placement Time
--------------------------------      ----------------------      -------------     -------------------
...
/data/col1/nsr/BackupDevice01/09/49/notes/62f4ba32-00000006-daf8a1c4-69f8a1c4-00275000-592bbe56 Active  848.00 B        Mon May  4 09:50:41 2026
/data/col1/nsr/BackupDevice01/09/49/62f4ba32-00000006-daf8a1c4-69f8a1c4-00275000-592bbe56       Active  10.49 GiB       Mon May  4 09:40:21 2026
...
-----------------------------------------------------------------

    Επηρεαζόμενα προϊόντα

    Data Domain, NetWorker

    Προϊόντα

    NetWorker Family
    Ιδιότητες άρθρου
    Article Number: 000023290
    Article Type: How To
    Τελευταία τροποποίηση: 04 Μαΐ 2026
    Version:  5
    Βρείτε απαντήσεις στις ερωτήσεις σας από άλλους χρήστες της Dell
    Υπηρεσίες υποστήριξης
    Ελέγξτε αν η συσκευή σας καλύπτεται από τις Υπηρεσίες υποστήριξης.