PowerFlex: How to Sanitize NVDIMM and SDPM - Video
Summary: PowerFlex/PowerEdge: How to Sanitize NVDIMM - Video
Αυτό το άρθρο ισχύει για
Αυτό το άρθρο δεν ισχύει για
Αυτό το άρθρο δεν συνδέεται με κάποιο συγκεκριμένο προϊόν.
Δεν προσδιορίζονται όλες οι εκδόσεις προϊόντων σε αυτό το άρθρο.
Instructions
Caution:
Sanitize operations on NVDIMM or SDPM permanently erase persistent memory data.
Before sanitizing NVDIMM\SDPM, All Flex and DAX devices must be removed from the SDS node.
- Steps from iDRAC for 16G and above generations only
- Go to Configuration > BIOS Settings > Memory Settings > scroll down to Persistent Memory
- From iDRAC web interface, change Current Value to Enabled from the drop-down list
Before sanitizing NVDIMMs, All Flex and DAX devices must be removed from the SDS node.
- Steps from the System Setup page for 14G and 15G (it also applies to higher generations)
-
- 14G PowerEdge: Allows sanitizing individual NVDIMMs or all NVDIMMs.
- 15G PowerEdge: Only supports sanitizing all NVDIMMs at once.
- While the Server is booting press F2 to enter System Setup
- Go to System BIOS > Memory Settings. The current system BIOS memory settings are displayed.
- Click Persistent Memory and select Enabled beside Sanitize All NVDIMMs
- 14G PowerEdge you can sanitize an individual NVDIMM , for detailed steps See article PowerFlex: How to sanitize NVDIMM after firmware downgrade
- 15G PowerEdge you can only sanitize all NVDIMMs
Before sanitizing NVDIMMs, All Flex and DAX devices must be removed from the SDS node.
Επηρεαζόμενα προϊόντα
PowerFlex rack, ScaleIO, VxRack Flex-PowerEdge 14GΙδιότητες άρθρου
Article Number: 000221219
Article Type: How To
Τελευταία τροποποίηση: 05 Ιουν 2026
Version: 10
Βρείτε απαντήσεις στις ερωτήσεις σας από άλλους χρήστες της Dell
Υπηρεσίες υποστήριξης
Ελέγξτε αν η συσκευή σας καλύπτεται από τις Υπηρεσίες υποστήριξης.