『PowerEdge: R360、T360 - デフォルトのiDRACライセンスが正しくありません
Summary: PowerEdge R360およびT360のデフォルトのiDRACライセンスが正しくありません。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
iDRACバージョン7.00.45.00および7.10.30.00では、R360およびT360のデフォルトのライセンス レベルは「Express」です。正しくありません。正しいデフォルト ライセンスは「Basic」です。
「高速」レベルは「基本」レベルよりも高いため、機能の損失はありません。ただし、システムと一緒に「Basic」ライセンスを購入した場合、iDRACファームウェアをアップデートすると、標準の「Basic」ライセンスに戻ります。
参考: Integrated Dell Remote Access Controller 9(iDRAC9)のサポート |Dell US
「高速」レベルは「基本」レベルよりも高いため、機能の損失はありません。ただし、システムと一緒に「Basic」ライセンスを購入した場合、iDRACファームウェアをアップデートすると、標準の「Basic」ライセンスに戻ります。
参考: Integrated Dell Remote Access Controller 9(iDRAC9)のサポート |Dell US
Cause
通常、x5xx以下のPowerEdgeシステムは、デフォルトのライセンスとして「ベーシック」に設定されています。ただし、iDRACの問題により、[Express]に変更されました。
Resolution
iDRAC 7.10.50.00以降のファームウェアで修正されています。
アップデート後、iDRACは正しいBasicレベルに戻ります。
アップデート後、iDRACは正しいBasicレベルに戻ります。
Affected Products
iDRAC9, PowerEdge R360, PowerEdge T360Article Properties
Article Number: 000223542
Article Type: Solution
Last Modified: 20 May 2026
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.