PowerProtect Data Manager: ADS0005 Reported During DD System Discovery

Summary: This article explains how to resolve ADS0005 errors during DD system discovery in PowerProtect Data Manager caused by a misconfigured login session limit that prevents authentication token generation. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

When attempting to discover a PowerProtect DD system in PowerProtect Data Manager, the discovery fails with error ADS0005, indicating that the authentication token is empty.

Unable to discover protection storage PowerProtect DD System with address <n.n.n.n> because of com.emc.brs.common.resource.ResourceException: 
Error while executing /rest/v1.0/systemcode: 5468 statusCode: 400 Error: **** Authentication token is empty..

 

Cause

The error occurs when the login-max-active option on the Data Domain system is set too low, preventing PowerProtect Data Manager from establishing a valid session and retrieving the required authentication token.

To verify the current setting, run:

adminaccess option show login-max-active

Resolution

To address the issue:

  1. Log in to the Data Domain system using CLI.
  2. Increase the maximum number of active login sessions by running:
 adminaccess option set login-max-active 100
  1. Retry the discovery operation from the PowerProtect Data Manager user interface.

This change sets the login-max-active value to its default, allowing PowerProtect Data Manager to successfully authenticate and complete the discovery process.

Affected Products

PowerProtect Data Manager
Article Properties
Article Number: 000356281
Article Type: Solution
Last Modified: 17 Aug 2026
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.