PowerProtect: Data Manager NTP 구성이 보호 엔진 및 프록시를 업데이트하지 않음
Summary: 고객은 PowerProtect를 성공적으로 구축한 후 NTP 서버를 사용 중지해야 했습니다. 따라서 Data Manager는 PowerProtect Data Manager에서 NTP 구성을 수동으로 업데이트하기로 결정했지만 보호 엔진 및 프록시를 업데이트하지 않고 여전히 이전 NTP 구성만 표시됩니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
PowerProtect: Data Manager NTP 구성이 보호 엔진 및 프록시를 업데이트하지 않음
Cause
사용 중지할 NTP 서버로, NTP 서버 구성을 위한 보호 엔진 및 프록시 호스트를 업데이트하지 않은 NTP 구성용 PowerProtect Data Manager 서버를 수동으로 업데이트했습니다.
Resolution
PowerProtect Data Manager Admin은 각 프록시 호스트에 관리자로 수동으로 로그인한 다음 루트로 전환하고 /etc/ntp.conf 및 /usr/local/brs/puppet/modules/ecdm/files/ntpd/ntp.conf 를 수동으로 업데이트합니다.
PowerProtect Data Manager > 재부팅 변수가 다시 로드되도록 합니다.
NTP 테스트
PowerProtect Data Manager > 재부팅 변수가 다시 로드되도록 합니다.
NTP 테스트
Note:
It's not recommended to manually change any hostname or IP address after the OVA is deployed. It becomes cumbersome if you are dealing with secure hidden password protected components such as Protection Engines etcArticle Properties
Article Number: 000226113
Article Type: Solution
Last Modified: 18 Oct 2024
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.