OneFS:事件通知:節點在根檔案系統上已達 95% 或更高的已用容量
Summary: 在舊版 Isilon IQ X 和 NL 系列節點上,根 (/) 目錄的最大大小為 500 MB,並顯示 95% 或更大的已用容量。即使沒有任何額外的使用者檔案或韌體套件安裝,仍會發生這種情況。較新的節點具有大小為 1 GB 的根目錄,通常顯示 49% 的已用容量。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
事件
Node reached 95% used capacity on the root file system.
-或-
The root partition is near capacity.
Event ID: 100010003
Cause
詳細資料
此事件表示一個或多個節點上的根分區即將達到滿容量。
發生此事件可能有多種原因。最常見的兩個原因是:
- 使用者已將檔案移至未指定的根目錄,而非 /ifs 目錄。
- 已升級節點韌體,但並未移除韌體套件。
Resolution
反應
使用以下一個或多個過程對此警報的原因進行故障排除。
要!
請勿在根分割區已滿或接近容量時移除或安裝任何軟體修補程式。嘗試在根分割區已滿時安裝/移除修補程式,可能會導致修補程式安裝或移除程序失敗。如果安裝或移除程序在具有完整根分割區的叢集上失敗,則可能無法回復至先前的系統組態。這種情況可能會使叢集處於不穩定或無法存取的狀態。
如需在 Isilon 叢集上維持足夠可用空間的詳細資訊,請參閱 Dell 線上支援網站上 的《叢集容量管理指南 》。
第 1 階段:刪除不屬於根 (/) 目錄的檔。
- 檢查警示訊息以判斷受影響的檔案系統。此訊息會識別叢集和產生警示的節點 (按節點編號)。此訊息也會將受影響的檔案系統識別為下列其中一項: ifs、 var、 crash 或 root。
- 在產生警示的節點上執行下列命令,列出 根目錄中大於 5 MB 的所有檔案:
find -x / -type f -size +10000 -exec ls -lh {} \; | awk '{ print $9 ": " $5 }'
將顯示類似於以下內容的輸出:
/boot/kernel.amd64/efs.ko: 10M /usr/libexec/cc1: 6.6M /usr/libexec/cc1plus: 7.2M /usr/libexec/cc1obj: 6.6M /usr/local/lib/libxerces-c-3.1.so: 5.6M /usr/local/lib/libxerces-c.so: 5.6M /usr/local/sbin/nmbd: 9.9M /usr/local/connectemc/connectemc: 15M /usr/local/aspera/sbin/asperacentral: 5.0M
上面的示例輸出列出了通常在 根目錄中找到的檔。不應刪除這些檔。
- 在輸出結果中尋找通常不屬於根目錄的任何檔案。例如 OneFS 安裝程式檔案、記錄收集或使用者建立的檔案。(請參閱上一步中的範例輸出,瞭解屬於根目錄中且不應移除的檔案。)
- 移除檔案,或將其移動至 /ifs 目錄。如果您不確定要移除哪些檔案,請聯絡 Isilon 技術支援以取得協助。
執行下列命令,確認根 (/) 目錄低於警示閾值:
isi_for_array -s 'df -h /'
將顯示類似於以下內容的輸出:
Filesystem Size Used Avail Capacity Mounted on /dev/imdd0a 496M 445M 11M 94% /
- 清除所有現有警示:
isi event bulk --resolved=true (OneFS 8.0 or newer) -or- isi events cancel all (OneFS 7.x or older)
- 如果在移除任何大型檔案後並未回收空間,請尋找仍有檔案開啟的程序。必須停止該進程才能關閉保留空間的檔句柄。請參閱文章 322712如何使用 fstat 命令列出節點上開啟的檔案。
- 如果問題未解決,請轉到第 2 階段。
第 2 階段:移除 Isilon 節點韌體套件。
Isilon 節點韌體套件隨附的說明包括在安裝韌體後移除韌體套件的步驟。如果未完成該步驟,可能會導致 根目錄超出容量。
- 執行下列命令,確認叢集上已安裝韌體套件:
isi upgrade patches list (OneFS 8.0 or newer) -or- isi pkg info (OneFS 7.x or older)
將顯示類似於以下內容的輸出:
IsiFw_Package_v8.2: Isilon firmware packages contain firmware images that may be used to update certain devices in your cluster. To install this firmware package, use the 'isi pkg install <package-filename>' command. Note that the act of installing the package will not automatically update your devices. Once installed, please refer to 'isi firmware --help' or the firmware section in 'man isi' for more information.
- 移除韌體升級套件,其中 <套件檔案名稱> 或 <修補> 程式是韌體套件檔案名稱的名稱:
isi upgrade patches uninstall --patch=<patch> (OneFS 8.0 or newer) -or- isi pkg delete <package-filename> (OneFS 7.x or older)
- 執行下列命令,確認 根目錄低於警示閾值:
isi_for_array -s 'df -h /'
將顯示類似於以下內容的輸出:
mycluster-1: Filesystem Size Used Avail Capacity Mounted on mycluster-1: /dev/imdd0a 496M 445M 11M 97% / mycluster-2: Filesystem Size Used Avail Capacity Mounted on mycluster-2: /dev/imdd0a 496M 445M 12M 97% / mycluster-3: Filesystem Size Used Avail Capacity Mounted on mycluster-3: /dev/imdd0a 496M 445M 12M 97% /
- 清除所有現有警示:
isi event bulk --resolved=true (OneFS 8.0 or newer) -or- isi events cancel all (OneFS 7.x or older)
- 如果問題未解決,請轉到第 3 階段。
第 3 階段:聯絡 Isilon 技術支援
如果無法判斷根 (/) 目錄接近或超過容量的原因,請執行下列步驟:
- 執行下列命令以收集系統記錄:
isi_gather_info -s 'ls -lhat /' -s 'du -axh / | sort -rn' -s 'du -xhd1 /'
記錄會自動上傳至 Dell 技術支援。
- 請聯絡 Dell 技術支援 部門,以協助對問題進行故障診斷。
Affected Products
PowerScale OneFSProducts
Isilon, PowerScale OneFSArticle Properties
Article Number: 000016965
Article Type: Solution
Last Modified: 26 Jun 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.