NVP-vProxy : Utilisation de l’outil de bilan de santé ProxyHC sur l’appliance vProxy

Summary: Utility fournit un moyen automatisé, efficace et lisible par l’utilisateur d’effectuer une première étape ou un autodiagnostic de base pour l’appliance vProxy.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Objectif :

Utility fournit un moyen automatisé, efficace et lisible par l’utilisateur d’effectuer une première étape ou un autodiagnostic de base pour l’appliance vProxy. L’utilitaire ProxyHC peut être copié sur le vProxy et exécuté à partir du dépannage NetWorker.


Par défaut, l’utilitaire ProxyHC n’est pas inclus sur le vProxy. L’utilitaire ProxyHC peut être téléchargé à partir de la page d’outils de support suivante : https://central.dell.com/solutions/Networker-Tools

NOTE:Cela utilise vos informations d’identification du site de support Dell. Pour les collaborateurs internes de Dell, vos informations d’identification d’entreprise sont utilisées. Pour vProxy 4.3.0.x (SuSE 12 SP5), vous pouvez utiliser ProxyHC-2.7.19. À partir de vProxy version 4.4.0.x (SuSE 15 SP4), vous devez utiliser ProxyHC-2.7.19.v2.

 

L’utilitaire peut être copié à l’aide des méthodes suivantes :

  • WinSCP :
    • Hôte : nom d’hôte vProxy
    • Protocole : SCP
    • Nom d’utilisateur : admin
      NOTE : la connexion root via SSH est généralement bloquée par défaut)
    • Path: /home/admin/.
       
  • Windows Server 2019 (et versions ultérieures) dispose de fonctionnalités de ligne de commande SCP :
scp ProxyHC admin@vProxyHostname:/home/admin/ProxyHC
image.png

Mode d’emploi :

1. Connectez-vous à l’appliance vProxy à l’aide de SSH, connectez-vous en tant qu’administrateur.
2. Basculez vers l’utilisateur root :
sudo su -
3. Rendez ProxyHC exécutable :
chmod +x /home/admin/ProxyHC

4. Exécutez ProxyHC :
/home/admin/ProxyHC flags
Exemples d’utilisation :
my-vproxy:/home/admin # /home/admin/ProxyHC vCenter --help
usage: ProxyHC vCenter [-h] --name NAME --user USER [--pwd PWD] [--vm VM]
                       [--nsruser NSRUSER] [--nsrpwd NSRPWD]
                       [--nsrauthc NSRAUTHC] [--allproxies ALLPROXIES]
                       [--DDhost DDHOST]
                       {auth,port,perm,disk,hotadd,migration,listsession,annotation,cleanup,kb524127,all,layout,tasks,datastore,vmsnapchain,vmdisksize,termsoapsession}
                       ...

positional arguments:
  {auth,port,perm,disk,hotadd,migration,listsession,annotation,cleanup,kb524127,all,layout,tasks,datastore,vmsnapchain,vmdisksize,termsoapsession}
                        sub-command help
    auth                test authentication against vCenter server
    port                check open ports to ESXi hosts in cluster and data
                        domain systems
    perm                check vCenter access permissions
    disk                check & release extra disks from vProxy
    hotadd              check for hotadd access to provided VM
    migration           check vCenter for stale migration locks
    listsession         print login session list to log
    annotation          check vCenter for stale backup locks(annotations)
    cleanup             remove left over artifacts(extra disks,
                        locks/annotations) and find migration locks.
    kb524127            check for invalid state of vProxy VM
    all                 All vCenter tools(combination of port, perm and
                        cleanup)
    layout              check for description of files that make up VM
    tasks               check orphaned tasks in vCenter
    datastore           look for datastores with unsupported names
    vmsnapchain         check if any protected VM has excessive child disks
    vmdisksize          check if any protected VM has irregular disk size i.e.
                        trailing .5 KB
    termsoapsession     terminate soap session to vCenter from NWS

optional arguments:
  -h, --help            show this help message and exit
  --name NAME           hostname of the vCenter server
  --user USER           user name for login to vCenter server
  --pwd PWD             password for login to vCenter server
  --vm VM               DNS name of VM(as shown in vSphere)
  --nsruser NSRUSER     user name for login to NetWorker server
  --nsrpwd NSRPWD       password for login to NetWorker server
  --nsrauthc NSRAUTHC   Remote AuthC server
  --allproxies ALLPROXIES
                        specify to do work on peer vProxies registered
  --DDhost DDHOST       provide DD IP/hostname for port connectivity tests
Remarque : Vous pouvez utiliser plusieurs balises dans une commande ProxyHC, par exemple : /home/admin/ProxyHC auth port perm tasks disk cleanup hotadd

 

5. Le fichier journal est généré sous /tmp/proxy-hc.log.

Additional Information

Affected Products

NetWorker

Products

NetWorker
Article Properties
Article Number: 000022590
Article Type: How To
Last Modified: 29 Sept 2025
Version:  14
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.