Dell Networking PowerSwitch OS9: Linkkikerroksen etsintäprotokollan ottaminen käyttöön ja hallinta

Summary: Tässä artikkelissa kerrotaan, miten LLDP (Link Layer Discovery Protocol) -protokolla otetaan käyttöön ja miten sitä hallitaan Dell Networking -kytkimissä, joissa on OS9.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Tavoitteet

1. Tärkeitä kohtia
2. Määritä LLDP
2. Näytä LLDP-kokoonpano
4. Näytä lähellä olevien LLDP-agenttien tiedot

 

Tärkeitä seikkoja

  • LLDP on oletusarvoisesti käytössä laiteohjelmistoversiosta 9.2.0.2 lähtien. Sitä aiemmissa versioissa LLDP on oletusarvoisesti poissa käytöstä.
  • Dell Networking -järjestelmien liittymät tukevat enintään kahdeksaa naapuria.
  • Dell Networking -järjestelmät tukevat enintään 8 000 järjestelmäkohtaista naapuria. Jos liitäntöjen määrä kerrottuna kahdeksalla ylittää enimmäismäärän, järjestelmään voi määrittää enintään 8 000 naapuria.
  • Liitäntätason määritykset ohittavat kaikki määritystason määritykset.

 

Määritä LLDP
 

Komento

Tarkoitus

FTOS# configure

Avaa määritystila.

FTOS(config)# protocol LLDP

Avaa LLDP-tila.

FTOS(config-lldp)# no disable

Disable-komento poistaa LLDP-protokollan käytöstä kokonaan. No disable -komento ottaa LLDP-protokollan käyttöön kaikkialla. Koska protokolla on otettu käyttöön disabled-muodossa, kyseisen komennon vastakohta ottaa protokollan käyttöön.

FTOS(conf-if-te-0/10)#protocol lldp

Sama LLDP-tila on liitäntätasolla. Kaikki nimenomaiset liitäntätason LLDP-tilan komennot ohittavat kaikki yleisesti määritetyt LLDP-parametrit.

 

Näytä LLDP-määritykset

 

Dell(conf)# protocol lldp

Dell(conf-lldp)# show config
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description hello 10
no disable

Dell(conf-lldp)# exit

Dell(conf)# interface gigabitethernet 1/31

Dell(conf-if-gi-1/31)# show config
!
interface GigabitEthernet 1/31
no ip address
switchport
no shutdown
Dell(conf-if-gi-1/31)# protocol lldp

Dell(conf-if-gi-1/31-lldp)# show config
!
protocol lldp

Näytä lähellä olevien LLDP-agenttien tiedot
 

Näytä läheisten laitteiden tiedot lyhyesti.

show lldp neighbors

Näytä kaikki tiedot, joita naapurit mainostavat.

show lldp neighbors detail

 

Esimerkki läheisten laitteiden lähettämien lyhyiden tietojen tarkastelemisesta

Dell(conf-if-te-0/3-lldp)# end

Dell (conf-if-te-0/3)# do show lldp neighbors

Loc      PortID      Rem Host Name        Rem Port Id                Rem Chassis Id
---------------------------------------------------------------------------------------------

Te 0/1                     -                     TenGigabitEthernet 0/5      00:01:e8:05:40:46
Te 0/2                     -                     TenGigabitEthernet 0/6      00:01:e8:05:40:46

 

Esimerkki läheisten laitteiden lähettämien yksityiskohtaisten tietojen tarkastelemisesta

Dell# show lldp neighbors detail
========================================================================
Local Interface Te 0/4 has 1 neighbor
Total Frames Out: 6547
Total Frames In: 4136
Total Neighbor information Age outs: 0
Total Frames Discarded: 0
Total In Error Frames: 0
Total Unrecognized TLVs: 0
Total TLVs Discarded: 0
Next packet will be sent after 7 seconds
The neighbors are given below:
-----------------------------------------------------------------------

Remote Chassis ID Subtype: Mac address (4)
Remote Chassis ID: 00:01:e8:06:95:3e
Remote Port Subtype: Interface name (5)
Remote Port ID: TeGigabitEthernet 2/11
Local Port ID: TenGigabitEthernet 1/21
Locally assigned remote Neighbor Index: 4
Remote TTL: 120
Information valid for next 120 seconds
Time since last information change of this neighbor: 01:50:16
Remote MTU: 1554
Remote System Desc: Dell Networks Real Time Operating System Software
Dell Operating System Version: 1.0.
Dell Application Software Version: 9.4.0.0. Copyright (c) 1999-2014
Build Time: Thu Aug 9 01:05:51 PDT 1999-2014
Existing System Capabilities: Repeater Bridge Router
Enabled System Capabilities: Repeater Bridge Router
Remote Port Vlan ID: 1
Port and Protocol Vlan ID: 1, Capability: Supported, Status: Enabled

---------------------------------------------------------------------------

Affected Products

PowerSwitch S3048-ON, PowerSwitch S4048-ON, PowerSwitch S4810P, PowerSwitch S4810-ON, PowerSwitch S4820T, PowerSwitch S5000, Force10 S60-44T, PowerSwitch S6000, PowerSwitch S6000 ON, PowerSwitch S4048T-ON, PowerSwitch S5048F-ON, PowerSwitch S6010-ON , PowerSwitch S6100-ON, PowerSwitch Z9100-ON ...
Article Properties
Article Number: 000120105
Article Type: How To
Last Modified: 31 Dec 2025
Version:  8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.