Dell Networking PowerSwitch OS9: Slik aktiverer og administrerer du Link Layer Discovery Protocol

Summary: Denne artikkelen forklarer hvordan du aktiverer og administrerer Link Layer Discovery Protocol (LLDP) på Dell Networking-svitsjer som kjører OS9.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Mål

1. Viktige punkter
2. Konfigurere LLDP
2. Se LLDP-konfigurasjon
4. Vise informasjon som annonseres av nærliggende LLDP-agenter

 

Viktige poeng

  • LLDP er aktivert som standard fra og med fastvareversjon 9.2.0.2. LLDP for tidligere versjoner er deaktivert som standard.
  • Dell Networking-systemer støtter opptil åtte naboer per grensesnitt.
  • Dell Networking-systemer støtter maksimalt 8000 naboer totalt per system. Hvis antallet grensesnitt multiplisert med åtte overskrider maksimum, konfigurerer ikke systemet mer enn 8000.
  • Konfigurasjoner på grensesnittnivå overstyrer alle konfigurasjoner på konfigurasjonsnivå.

 

Konfigurere LLDP
 

Kommando

Purpose

FTOS# configure

Åpne konfigurasjonsmodus.

FTOS(config)# protocol LLDP

Åpne LLDP-modus.

FTOS(config-lldp)# no disable

Deaktivert: LLDP slås av globalt. Ikke deaktivert: LLDP slås på globalt. Ettersom protokollen ble introdusert som «deaktivert», slås protokollen på med det motsatte av dette.

FTOS(conf-if-te-0/10)#protocol lldp

Samme LLDP-modus finnes på grensesnittnivå. Alle spesifikke LLDP-moduskommandoer på grensesnittnivå overstyrer eventuelle globalt konfigurerte LLDP-parametre.

 

Vise LLDP-konfigurasjon

 

Dell(conf)# protocol lldp

Dell(conf-lldp)# show config
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description hello 10
no disable

Dell(conf-lldp)# exit

Dell(conf)# interface gigabitethernet 1/31

Dell(conf-if-gi-1/31)# show config
!
interface GigabitEthernet 1/31
no ip address
switchport
no shutdown
Dell(conf-if-gi-1/31)# protocol lldp

Dell(conf-if-gi-1/31-lldp)# show config
!
protocol lldp

Vise informasjon som annonseres av nærliggende LLDP-agenter
 

Vise kortfattet informasjon om nærliggende enheter.

show lldp neighbors

Vis all informasjon som naboer annonserer.

show lldp neighbors detail

 

Eksempel på visning av kortfattet informasjon annonsert av naboer

Dell(conf-if-te-0/3-lldp)# end

Dell (conf-if-te-0/3)# do show lldp neighbors

Loc      PortID      Rem Host Name        Rem Port Id                Rem Chassis Id
---------------------------------------------------------------------------------------------

Te 0/1                     -                     TenGigabitEthernet 0/5      00:01:e8:05:40:46
Te 0/2                     -                     TenGigabitEthernet 0/6      00:01:e8:05:40:46

 

Eksempel på visning av detaljer annonsert av naboer

Dell# show lldp neighbors detail
========================================================================
Local Interface Te 0/4 has 1 neighbor
Total Frames Out: 6547
Total Frames In: 4136
Total Neighbor information Age outs: 0
Total Frames Discarded: 0
Total In Error Frames: 0
Total Unrecognized TLVs: 0
Total TLVs Discarded: 0
Next packet will be sent after 7 seconds
The neighbors are given below:
-----------------------------------------------------------------------

Remote Chassis ID Subtype: Mac address (4)
Remote Chassis ID: 00:01:e8:06:95:3e
Remote Port Subtype: Interface name (5)
Remote Port ID: TeGigabitEthernet 2/11
Local Port ID: TenGigabitEthernet 1/21
Locally assigned remote Neighbor Index: 4
Remote TTL: 120
Information valid for next 120 seconds
Time since last information change of this neighbor: 01:50:16
Remote MTU: 1554
Remote System Desc: Dell Networks Real Time Operating System Software
Dell Operating System Version: 1.0.
Dell Application Software Version: 9.4.0.0. Copyright (c) 1999-2014
Build Time: Thu Aug 9 01:05:51 PDT 1999-2014
Existing System Capabilities: Repeater Bridge Router
Enabled System Capabilities: Repeater Bridge Router
Remote Port Vlan ID: 1
Port and Protocol Vlan ID: 1, Capability: Supported, Status: Enabled

---------------------------------------------------------------------------

Affected Products

PowerSwitch S3048-ON, PowerSwitch S4048-ON, PowerSwitch S4810P, PowerSwitch S4810-ON, PowerSwitch S4820T, PowerSwitch S5000, Force10 S60-44T, PowerSwitch S6000, PowerSwitch S6000 ON, PowerSwitch S4048T-ON, PowerSwitch S5048F-ON, PowerSwitch S6010-ON , PowerSwitch S6100-ON, PowerSwitch Z9100-ON ...
Article Properties
Article Number: 000120105
Article Type: How To
Last Modified: 31 Dec 2025
Version:  8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.