Dell Networking PowerSwitch OS9: Link Layer Discovery Protocolを有効にして管理する方法

Summary: この記事では、OS9を実行しているDell NetworkingスイッチでLink Layer Discovery Protocol (LLDP)を有効にして管理する方法について説明します。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

目的

1.重要なポイント
2.LLDP
2 を設定します。LLDP構成を表示します
4.隣接するLLDPエージェントによって通知される情報の表示

 

重要なポイント

  • LLDPは、ファームウェアリリース9.2.0.2からデフォルトで有効になります。これ以前のバージョンのLLDPはデフォルトでは無効になっています。
  • Dell Networkingシステムはインターフェイスごとに最大8つの隣接するデバイスに対応します。
  • Dell Networkingシステムでは、システムごとに最大8000の隣接デバイスに対応します。インターフェイス数に8をかけた時の数が最大数を超えると、システムは8000を超えるデバイスの設定は行いません。
  • インターフェイスレベルの設定が、構成レベルの設定より優先されます。

 

LLDPの設定
 

コマンド

目的

FTOS# configure

設定モードに入ります。

FTOS(config)# protocol LLDP

LLDPモードに入ります。

FTOS(config-lldp)# no disable

disableでLLDPはグローバルにオフになります。no disableでLLDPはグローバルにオンになります。プロトコルは「disabled」で導入されたため、「no」ステートメントでオンになります。

FTOS(conf-if-te-0/10)#protocol lldp

インターフェイスレベルにも同じLLDPモードがあります。特定インターフェイスレベルのLLDPモードコマンドはすべて、グローバルに設定されているLLDPパラメーターより優先されます。

 

LLDPの設定の表示

 

Dell(conf)# protocol lldp

Dell(conf-lldp)# show config
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description hello 10
no disable

Dell(conf-lldp)# exit

Dell(conf)# interface gigabitethernet 1/31

Dell(conf-if-gi-1/31)# show config
!
interface GigabitEthernet 1/31
no ip address
switchport
no shutdown
Dell(conf-if-gi-1/31)# protocol lldp

Dell(conf-if-gi-1/31-lldp)# show config
!
protocol lldp

隣接するLLDPエージェントによって通知される情報の表示
 

隣接デバイスに関する要約情報を表示します。

show lldp neighbors

近隣住民が宣伝しているすべての情報を表示します。

show lldp neighbors detail

 

近隣デバイスで通知している要約情報の例を示します。

Dell(conf-if-te-0/3-lldp)# end

Dell (conf-if-te-0/3)# do show lldp neighbors

Loc      PortID      Rem Host Name        Rem Port Id                Rem Chassis Id
---------------------------------------------------------------------------------------------

Te 0/1                     -                     TenGigabitEthernet 0/5      00:01:e8:05:40:46
Te 0/2                     -                     TenGigabitEthernet 0/6      00:01:e8:05:40:46

 

近隣デバイスで通知している詳細な情報の例を示します。

Dell# show lldp neighbors detail
========================================================================
Local Interface Te 0/4 has 1 neighbor
Total Frames Out: 6547
Total Frames In: 4136
Total Neighbor information Age outs: 0
Total Frames Discarded: 0
Total In Error Frames: 0
Total Unrecognized TLVs: 0
Total TLVs Discarded: 0
Next packet will be sent after 7 seconds
The neighbors are given below:
-----------------------------------------------------------------------

Remote Chassis ID Subtype: Mac address (4)
Remote Chassis ID: 00:01:e8:06:95:3e
Remote Port Subtype: Interface name (5)
Remote Port ID: TeGigabitEthernet 2/11
Local Port ID: TenGigabitEthernet 1/21
Locally assigned remote Neighbor Index: 4
Remote TTL: 120
Information valid for next 120 seconds
Time since last information change of this neighbor: 01:50:16
Remote MTU: 1554
Remote System Desc: Dell Networks Real Time Operating System Software
Dell Operating System Version: 1.0.
Dell Application Software Version: 9.4.0.0. Copyright (c) 1999-2014
Build Time: Thu Aug 9 01:05:51 PDT 1999-2014
Existing System Capabilities: Repeater Bridge Router
Enabled System Capabilities: Repeater Bridge Router
Remote Port Vlan ID: 1
Port and Protocol Vlan ID: 1, Capability: Supported, Status: Enabled

---------------------------------------------------------------------------

Affected Products

PowerSwitch S3048-ON, PowerSwitch S4048-ON, PowerSwitch S4810P, PowerSwitch S4810-ON, PowerSwitch S4820T, PowerSwitch S5000, Force10 S60-44T, PowerSwitch S6000, PowerSwitch S6000 ON, PowerSwitch S4048T-ON, PowerSwitch S5048F-ON, PowerSwitch S6010-ON , PowerSwitch S6100-ON, PowerSwitch Z9100-ON ...
Article Properties
Article Number: 000120105
Article Type: How To
Last Modified: 31 Dec 2025
Version:  8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.