PowerScale: Isilon: OneFS - NDMP 트래픽에 대한 PCAP를 수집하는 방법
Summary: 이 KB는 NDMP 트래픽에 대한 PCAP를 수집하는 방법에 대한 단계별 지침을 제공합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
1부 - NDMP 및 네트워크 정보
수집1. NDMP 세션이 실행 중인 노드 및 DMA의 IP 주소를 기록합니다. 이 예에서는 세션 ID가 68221인 노드 10에서 NDMP 작업이 실행되고있습니다. DMA의 IP는 x.x.188.14입니다.
2부 - 패킷을 캡처하고 Isilon 지원 팀에 파일 업로드
1. 패킷 캡처를 저장할 디렉토리를 만듭니다.
2. 패킷 캡처를 시작합니다. 값은 다음과 같이 정의됩니다.
- <DMA_IP>. DMA의 IP 주소(1부 1단계).
> 노드의 모든 인터페이스(1부 1단계의 노드 번호)
3. 이벤트가 다시 생성되면 클러스터 전체에서 Tcpdump 프로세스를 종료하고 오래된 PID가 없는지 확인합니다.
4. 전체 로그 및 PCAP를 Isilon Support에 업로드합니다.
수집1. NDMP 세션이 실행 중인 노드 및 DMA의 IP 주소를 기록합니다. 이 예에서는 세션 ID가 68221인 노드 10에서 NDMP 작업이 실행되고있습니다. DMA의 IP는 x.x.188.14입니다.
cluster-1# isi ndmp sessions list Session Data Mover OP Elapsed Time Bytes Moved Throughput ---------------------------------------------------------------------- 10.68221 ACTIVE IDLE B(tS10+) 3h 32m 1.0775TB 162.09MB/s ---------------------------------------------------------------------- Total: 1 cluster-1# isi ndmp sessions list --verbose Session: 10.68221 <--- Node 10, session ID 68221 Client: x.x.188.14 <--- DMA IP address Remote DS: Local Start Time: Tue Jun 30 06:46:10 2020 Elapsed Time: 3h 32m Operation: B(S10+) Source Path: /ifs/data Destination Path: Data State: ACTIVE Mover State: IDLE Bytes Moved: 1.0792TB Throughput: 161.50MB/s Tape: Media Changer: cluster-1#
2부 - 패킷을 캡처하고 Isilon 지원 팀에 파일 업로드
1. 패킷 캡처를 저장할 디렉토리를 만듭니다.
# mkdir -p /ifs/data/Isilon_Support/$(date +%F)
2. 패킷 캡처를 시작합니다. 값은 다음과 같이 정의됩니다.
- <DMA_IP>. DMA의 IP 주소(1부 1단계).
> 노드의 모든 인터페이스(1부 1단계의 노드 번호)
# for iface in `isi_for_array -n <node_number> ifconfig | grep -B3 ether | grep flags | egrep -v "laggport|lo0|ISIINTERNAL" | cut -d: -f1` ; do isi_for_array -n <node_number> tcpdump -i $iface -s 600 -C 200 -W 4 -w /ifs/data/Isilon_Support/$(date +%F)/`hostname`.${iface}_$(date +%F_%H%M%S).pcap host <DMA_IP> &>> /ifs/data/Isilon_Support/$(date +%F)/$(uname -n).$(date +%F_%H%M%S).$iface.log & ; done
3. 이벤트가 다시 생성되면 클러스터 전체에서 Tcpdump 프로세스를 종료하고 오래된 PID가 없는지 확인합니다.
# isi_for_array -X 'killall -SIGINT tcpdump' # isi_for_array ps -auxx | grep tcpdump
4. 전체 로그 및 PCAP를 Isilon Support에 업로드합니다.
# isi_gather_info -f /ifs/data/Isilon_Support/$(date +%F)
Additional Information
Article Properties
Article Number: 000195255
Article Type: How To
Last Modified: 10 Oct 2024
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.