ECS：Racadm 发送“本地 RACADM 的一个实例已在执行。正在退出当前会话”

Summary: 本文介绍如何在出现上述消息时使 racadm 命令正常工作。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Running racadm 有时无法运行，如以下示例所示：

admin@ecsnode1:~> sudo -i racadm getversion

One Instance of Local RACADM is already executing. Exiting the current session.

Cause

而 racadm 可能在上一个会话中运行，并且在 bash 关闭之前未完成，留下一个 PID 文件，该文件现在会阻止该命令。

Resolution

检查以下 PID 文件是否存在：

admin@ecsnode1:~> ls -l /var/run/local_racadm.pid
-rw-r--r-- 1 root root 5 Mar 2  2022 /var/run/local_racadm.pid
admin@ecsnode1:~>

检查除您自己之外，此时是否有其他人连接到节点：

admin@ecsnode1:~> who
admin    pts/0        Mar  3 14:34 (169.254.1.1)
admin@ecsnode1:~>

如果没有迹象表明任何人正在运行 racadm 命令，删除 PID 文件：

admin@ecsnode1:~> sudo rm -rf /var/run/local_racadm.pid 
admin@ecsnode1:~>

确认它现在是否正常工作：

admin@ecsnode1:~> sudo -i racadm getversion
Bios Version                     = 2.3.10

iDRAC Version                    = 4.40.40.00

Lifecycle Controller Version     = 4.40.40.00

IDSDM Version                    = NA

Affected Products

ECS

Products

ECS Appliance, ECS Appliance Gen 3, Elastic Cloud Storage
Article Properties
Article Number: 000196996
Article Type: Solution
Last Modified: 11 Dec 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.