Connectrix MDS upgrade retourneert bericht "Pre-upgrade check failed "Return code -1"
Summary: Bij het uitvoeren van een Connectrix MDS upgrade geeft de opdracht "install all" het bericht "Pre-upgrade check failed. "Retourcode -1."
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Bij een poging om de opdracht 'install all' uit te voeren, geeft de switch het bericht 'Pre-upgrade check failed. "Retourcode -1."
Geen indicaties van wat er mis is, md5sum van de firmwarebestanden zijn goed. Voldoende ruimte op de bootflash: en ook op de stand-by supervisor, maar de opdracht 'install all' mislukt met 'Return code -1'.
Geen indicaties van wat er mis is, md5sum van de firmwarebestanden zijn goed. Voldoende ruimte op de bootflash: en ook op de stand-by supervisor, maar de opdracht 'install all' mislukt met 'Return code -1'.
Cause
De opdracht
werkt prima.
De opdracht
(Dit is hetzelfde bericht als de opdracht 'install all'.)
"show incompatibility-all system bootflash:m9700-sf2ek9-xxxx.bin"
werkt prima.
De opdracht
"show install all impact kickstart bootflash:m9700-sf2ek9-kickstart-mz.xxxx.bin system bootflash:m9700-sf2ek9-mz.xxxx.bin" fails with "Return code -1."
(Dit is hetzelfde bericht als de opdracht 'install all'.)
Resolution
Tijdelijke oplossing:
- Voer een opdracht 'system switchover' uit om failover uit te voeren naar de tweede supervisor. Wacht tot de opdracht is voltooid. Gebruik de opdracht "show system redundancy status" om te bevestigen dat de actie is voltooid.
- Voer een tweede opdracht "system switchover" uit om terug te gaan naar de eerder actieve supervisor waar de upgradecode zich momenteel bevindt.
- Voer de opdracht 'install all' opnieuw uit en de upgrade moet worden voltooid.
Affected Products
Connectrix MDS-9710-V2, Connectrix MDS-Series Firmware 8.XProducts
Connectrix MDS-9506, Connectrix MDS-9509, Connectrix MDS-9513, Connectrix MDS-9706, Connectrix MDS-9706-V2, Connectrix MDS-9710, Connectrix MDS-9718, Connectrix MDS-9718-V3Article Properties
Article Number: 000197811
Article Type: Solution
Last Modified: 10 Sept 2025
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.