Dell Unity: How to Enable and Disable SSH
Summary: This article describes multiple ways to enable and disable SSH on Dell Unity arrays.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
METHOD 1: From Unisphere (UI) - when the array is in normal mode
To enable:

To disable:


METHOD 2: UEMCLI
To view the SSH setting:
uemcli.exe -d <MGMT IP> -u admin -securePassword /service/ssh show
To enable SSH:
uemcli.exe -d <MGMT IP> -u admin -securePassword /service/ssh set -enabled yes
To disable SSH:
uemcli.exe -d <MGMT IP> -u admin -securePassword /service/ssh set -enabled no
METHOD 3: With an IPMI Connection
To view the SSH status:
svc_ssh -s
To enable SSH:
svc_ssh -e
To disable SSH:
svc_ssh -d
METHOD 4: From Unisphere Service (UI) - when the array is in service mode
1. Open a browser.
2. Go to https://<management_IP>/service.html
3. Use the admin credentials.
4. From this menu SSH can be enabled.
Additional Information
Other useful articles while troubleshooting SSH-related issues:
Affected Products
Dell EMC Unity, Dell Unity 450F DC, Dell Unity 300, Dell Unity 300 DC, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell Unity 350F DC, Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity 400, Dell Unity 400 DC, Dell EMC Unity 400F
, Dell EMC Unity 450F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Hybrid
...
Products
Dell Command | ConfigureArticle Properties
Article Number: 000446216
Article Type: How To
Last Modified: 15 Apr 2026
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.