Unisphere for PowerMax: SMC 계정을 사용한 UI 액세스가 실패하고 "ERROR LOGGING IN"이 표시됨
Summary: SMC 사용자 계정을 사용하여 로그인할 수 없으며 독립 실행형 Linux 호스트에서 "Error logging in." 오류와 함께 실패합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Unisphere for PowerMax 버전 9.1.x 및 9.2.x
Unisphere는 독립 실행형 Linux 호스트에 설치됩니다.
오류 smas.log:
Crypto.getComputerName: Unable to determine hostname; using default.
Cause
ROOT 사용자가
아닌 SUDO 사용자로 Unisphere for PowerMax 설치 및 실행이는 운영 체제 및 설치 관리자와 관련된 사용자 권한 문제입니다. 호스트 이름은 초기 설치 사용자(ISU)를 생성하기 위한 일회용 암호(OTP) 토큰에 필요합니다.
아닌 SUDO 사용자로 Unisphere for PowerMax 설치 및 실행이는 운영 체제 및 설치 관리자와 관련된 사용자 권한 문제입니다. 호스트 이름은 초기 설치 사용자(ISU)를 생성하기 위한 일회용 암호(OTP) 토큰에 필요합니다.
Resolution
이전에 설치한 패키지를 제거하고 SMAS 폴더를 제거합니다. ROOT로 로그인하면 설치가 성공합니다.
Affected Products
Unisphere for PowerMaxArticle Properties
Article Number: 000187038
Article Type: Solution
Last Modified: 06 Aug 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.