PowerStore: 히스 검사가 누락된 SSD 문제를 감지합니다.

Summary: SSD 감지 상태 점검은 상태 점검 패키지에서 자동 SSD 문제가 있는지 여부를 감지합니다. 이 검사는 시스템 검사와 PUHC를 통해 모두 수행됩니다.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

상태 점검은 SSD 드라이브가 DRE(Dynamic Resiliency Engine Group)(RAID)에서 제거되었는지 여부를 감지하지만 PowerStore는 SSD가 제거되었음을 감지하지 않습니다. 이 문제는 KB 문서 000216381 PowerStore에 설명되어 있습니다. 알림이 표시되지 않고 SSD에 실패함

상태 점검은 다음 시나리오에서 이를 감지합니다.
  • PUHC(PreUpgrade Health Check) 실행:image.png
 
  • 시스템 검사 실행:image.png
  • SSH 연결을 사용하여 시스템 상태 서비스 스크립트(svc_health_check)를 실행합니다. 참고: 설명을 위해 출력이 잘립니다. 
[SVC:cyc@ABCDEF-A ~]$ svc_health_check 통과 I/O 포트 node_b 통과
node_a
이름 위치 상태 설명
I/O 포트를 실행
합니다.
.
.
Safe Node Failover Check node_b Passed
Silent Drive failure Check node_a Failed Detected 1 drive with silent failure. 데이터 경로의 디스크 ID는 8입니다. (KB#000216659) <<< 자동 드라이브 검사   



 

Cause

드문 경우지만 PowerStore의 제어 모듈이 SSD 장애를 감지하지 못합니다. 이로 인해 SSD 알림이 자동으로 삭제되고 SupportAssist로 알림이 전송되지 않습니다.

Resolution

장애가 발생한 SSD를 교체해야 합니다. 

Dell 기술 지원 부서에 문의하거나 이 문제가 발생했는지 확인합니다. 신속한 처리를 위해 서비스 요청에서 이 KB 문서를 참조하십시오.

Additional Information

Affected Products

PowerStore
Article Properties
Article Number: 000216659
Article Type: Solution
Last Modified: 14 Jun 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.