PowerStore:系统运行状况检查检测到可能影响 NVMeoF 卷映射的目标端口组问题

Summary: 如果事先出现添加设备故障,映射 NVMeoF 卷可能会导致服务中断。 系统运行状况检查检测到在映射 NVMeoF 卷时可能导致服务中断的目标端口组问题。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

脱机运行状况检查程序包中的系统检查可能标识无效的目标组 ID。KB 000216639 PowerStore 中介绍了此问题:映射 NVMeoF 卷可能会导致多设备群集的服务中断

在以下情况下检测到此问题: 
  • 使用 PowerStore Manager (UI) Run System Check 选项运行系统检查
image.png
 
  • 使用 SSH 连接运行系统运行状况服务脚本 (svc_health_check):  提醒:输出截断以说明目的。
[SVC:cyc@ABCDEF-A ~]$ svc_health_check运行 -rhc target_port_group_id_check
名称位置状态 说明
目标端口组 ID 检查 node_a 失败 本地target_port_group_id的最大值超过最大阈值 29。  (KB000216953)    

Cause

在多个添加设备失败后,可能会为目标组 ID 分配一个超出有效范围的值。当使用 NVMEoF 主机映射时,这将影响群集。

Resolution

请联系技术支持以获得解决此问题的帮助。应尽快解决此问题。
如果未解决,则节点可能会进入服务模式或发生故障,从而影响设备的高可用性。  

此问题计划在未来的 PowerStoreOS 版本中得到解决。 

Additional Information

Affected Products

PowerStore
Article Properties
Article Number: 000216953
Article Type: Solution
Last Modified: 14 Jun 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.