Changing iDRAC settings on a PowerScale node
Summary: How to change default iDRAC settings on PowerScale F, P and B series nodes.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
PowerScale F200/F210/F600/F710/F900/F910/P100/B100 nodes are based on PowerEdge technology. These node models have an iDRAC that can be connected to like any other PowerEdge server. While the nodes are based on PowerEdge technology, engineering requires specific settings in the iDRAC and BIOS.
To change the node settings that are not documented in an official procedure, you must open a service request with support for approval. No changes should be made to the node iDRAC/BIOS settings until approval has been received.
Affected Products
PowerScale F210, PowerScale F710Article Properties
Article Number: 000253700
Article Type: How To
Last Modified: 11 Feb 2025
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.