Running DCPP Automation with HTML Report Fails on Dell Pro Desktops

Summary: The following article provides information about an issue running Dell Command | PowerShell Provider (DCPP) with Dell Pro Desktops. This is seen when attempting to run an automation with an HTML report. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Dell Pro Desktops have an issue with automating reports with DCPP

 

You may experience the following issues with DCPP on your Dell Pro desktop:

Table.1: Failure Symptoms
Secure Boot Encryption
LogoType Dell Logo, Custom Logo Fail LogoType Validation
Set Value is Dell Logo | Product value is Dell Logo | CfgValue is Dell Logo Fail
Set Value is Custom Logo | Product value is Custom Logo | CfgValue is Custom Logo Fail

This affects the following Dell Pro Desktops:

  • Dell Pro Tower QCT1255 desktop
  • Dell Pro Micro QCM1255 desktop

What is Dell Command | PowerShell Provider?

Dell Command | PowerShell Provider is a module that allows you to manage BIOS configuration through the Windows PowerShell interface. This module works for local and remote devices. It even works in a Windows Preinstallation Environment (WinPE).

Cause

This is due to a BIOS coding issue.

Resolution

Note: You must have administrator rights on the faulty desktop to make any operating system changes or update any software.

Update the BIOS to Dell Pro Tower QCT1255/Slim QCS1255/Micro QCM1255 System BIOS, version 1.1.3 or later. Use the instructions in the following link to download and install the Dell_Pro_QCT1255_QCS1255_QCM1255_1.1.3.exe update file:


Back to Top

Affected Products

Dell Pro Micro QCM1255, Dell Pro Tower QCT1255
Article Properties
Article Number: 000299090
Article Type: Solution
Last Modified: 29 May 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.