Dell Command | Configure Toolkit Returns an Error When Setting Secure Boot Mode to Audit Mode

Summary: This article provides information about Dell Command | Configure Toolkit returning an error when setting Secure Boot Mode to Audit Mode by Dell Command | Configure Toolkit.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Dell Command | Configure Toolkit Returns an Error

 

The Dell Command | Configure Toolkit (CCTK) cannot set the Secure Boot Mode to Audit Mode and returns an error log.

XXXX/XX/XX XX:XX:XX cctk - Option : SecureBootMode

XXXX/XX/XX XX:XX:XX cctk - Error in Setting the Value

 


Back to Top

 

Cause

 

The Secure Boot Mode is expected not to allow it to be set unless the PK is clear.


Back to Top

 

Resolution

 

Go to BIOS setup to Enable Custom Mode and Delete All Keys first then CCTK can set the Secure Boot Mode.

BIOS Setup

(Figure 1 - BIOS Setup)

 


Back to Top

 

Affected Products

OptiPlex, Latitude, Dell Command | Configure
Article Properties
Article Number: 000205212
Article Type: Solution
Last Modified: 24 Apr 2025
Version:  9
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.