VxRail：設定 HTTPS Proxy 時無法部署 OVF

Summary: 設定 HTTPS Proxy 時無法部署 OVF。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

在 /var/log/vmware/vpxd.log 中會看到類似以下的錯誤： 
Unrecognized SSL message, plaintext connection?, note that HTTP/s proxy is configured for the transfer
2020-09-16T14:41:59.004+02:00 info vpxd[14866] [Originator@6876 sub=Default opID=2b691553-01] [VpxLRO] -- ERROR task-1978410 -- UPSA913s-x64-VM01-noV
APP -- ResourcePool.ImportVAppLRO: vim.fault.OvfImportFailed:
--> Result:
--> (vim.fault.OvfImportFailed) {
-->  faultCause = (vmodl.fault.SystemError) {
-->   faultCause = (vmodl.MethodFault) null,
-->   faultMessage = (vmodl.LocalizableMessage) [
-->     (vmodl.LocalizableMessage) {
-->      key = "com.vmware.ovfs.ovfs-main.ovfs.transfer_failed",
-->      arg = (vmodl.KeyAnyValue) [
-->        (vmodl.KeyAnyValue) {
-->         key = "0",
-->         value = "Invalid response code: 403, note that HTTP/s proxy is configured for the transfer"
-->      message = "Transfer failed: Invalid response code: 403, note that HTTP/s proxy is configured for the transfer."
-->   reason = ""
-->   msg = "Transfer failed: Invalid response code: 403, note that HTTP/s proxy is configured for the transfer."
-->  faultMessage =

Cause

OVF 部署程式無法連線至 Proxy 伺服器，並出現以下錯誤：  
Transfer failed: Invalid response code: 403, note that HTTP/s proxy is configured for the transfer.
此「不正確回應代碼：403 吋是來自 PROXY 伺服器的回應，表示不允許存取目的地資源。

使用 Proxy 時，OVF 傳輸需要具備 HTTPS 功能的 Proxy。請確定 Proxy 支援 HTTPS，或使用以下因應措施略過 Proxy。

Resolution

  1. 請使用以下兩種方法之一解決此問題。以下為 區分大小寫：
  • 修改 HTTPS PROXY 組態以使用 HTTP：
  1. 修改 /etc/sysconfig/Proxy 檔案。變更HTTPS_PROXY行，將值從 HTTPs 更新為 HTTP：
From:
HTTPS_PROXY="https://proxy.domain.tld:3128/"

To:
HTTPS_PROXY="http://proxy.domain.tld:3128/"
  1. 如果 Proxy 伺服器的 FQDN 無法運作，或者使用其 IP 位址。
  2. 如果您是 7.0 U1 之前的版本，請重新開機VCSA。否則，請使用以下命令 重新開機 服務：
# service-control --stop --all && service-control --start --all
  • 將主機新增至NO_PROXY組態以略過 Proxy：
  1. 使用 SSH 會話 聯 機至 vCenter Server。
  2. 修改 /etc/sysconfig/Proxy 檔案。將 ESXi 主機 FQDN 或 IP 新增至下列行，並以逗號分隔，接著為空白字元。例如：
NO_PROXY="localhost, 127.0.0.1, ESXi-01.test.com"
  1. 嘗試從內容庫和 vSphere 用戶端部署 OVF。

Affected Products

VMWare Cloud on Dell EMC VxRail E560F, VMWare Cloud on Dell EMC VxRail E560N, VxRail Appliance Family, VxRail Appliance Series, VxRail G Series Nodes, VxRail D Series Nodes, VxRail E Series Nodes, VxRail P Series Nodes, VxRail S Series Nodes , VxRail Software ...

Products

XC Core Systems, XC Series Appliances, VxRail V Series Nodes, VxRail VD Series Nodes
Article Properties
Article Number: 000216499
Article Type: Solution
Last Modified: 19 Aug 2023
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.