Unisphere for VMAX: De installatie van versie 8.3 is mislukt met "Error: 8.3 Het maken van bestandsnamen is uitgeschakeld".
Summary: De installatie van Unisphere for VMAX versie 8.3 is mislukt met "Error: 8.3 Het maken van bestandsnamen is uitgeschakeld". De uni8.3 kan niet worden geïnstalleerd.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
De installatie van Unisphere for VMAX 8.3 mislukt met "Error: 8.3 het maken van bestandsnamen is uitgeschakeld", ook al heeft het installatievolume de status "8dot3 name creation is enabled".
Milieu:
Milieu:
- Microsoft Windows 2012
- Dell EMC Unisphere voor VMAX: Ver 8.3
Cause
De Windows 8 Dot 3-naamgevingsconventie is standaard uitgeschakeld. U moet het pad naar Windows-systemen controleren.
Resolution
Om dit probleem op te lossen, moet u de variabele "Path" in Windows controleren.
Dit kan op twee manieren:
Dit kan op twee manieren:
- Via de systeeminformatie-MMC:
Eigenschappen van mijn computer>? Geavanceerde systeemeigenschappen> Omgevingsvariabelen>
- Bewerk "Path" om het installatiepad voor het SYMCLI\bin-bestand op te nemen.
- Zorg er ook voor dat de standaard Windows-variabelen ook aanwezig zijn. Als u deze verwijdert, wordt de fout veroorzaakt.
- Of via een opdrachtprompt:
- Typ "Path" vanuit de opdrachtregel.
C:\>fsutil 8dot3name set G:
0Het gedrag van 8dot3name is ingesteld.
0Het gedrag van 8dot3name is ingesteld.
Additional Information
Raadpleeg het artikel 481086 De installatie van Unisphere voor VMAX 8.2 is mislukt met "Error: 8.3 het maken van bestandsnamen is uitgeschakeld", ook al heeft het installatievolume de status "8dot3 name creation is enabled".
Affected Products
Unisphere for VMAXProducts
Unisphere for VMAXArticle Properties
Article Number: 000063165
Article Type: Solution
Last Modified: 14 Apr 2024
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.