PowerStore:在 Samsung SAS 驱动器中检查锁定固件端口的升级前运行状况检查

Summary: 运行状况检查程序包中的升级前运行状况检查 (PUHC) 会检测是否存在锁定固件端口的 Samsung PM1643/PM1643a SAS 驱动器。此检查旨在检测具有锁定固件端口的 SAS 驱动器,以防止磁盘固件升级成功。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

 作为磁盘固件升级的一 部分,PUHC 会检查群集是否具有锁定固件端口的 Samsung PM1643/PM1643a SAS 驱动器。
如果检测到具有锁定固件端口的驱动器,则会显示以下消息“Found Samsung SAS drives with firmware port locked.KB#000207951。请联系您的服务提供商。(drive_fw_port_check)”。 
 
image.png

image.png

Cause

Samsung SAS 驱动器 PM1643 和 PM1643A SAS TCG Enterprise SED 附带锁定在制造过程中的固件端口,因此这些驱动器的驱动器固件升级可能会失败。如果检测到锁定的固件端口,戴尔支持可以解决此问题。

对于D@ARE禁用的群集,此运行状况检查可能会引发误报。

Resolution

请联系戴尔技术支持以解决此问题。请参阅本知识库文章以加快处理。

Additional Information

Affected Products

PowerStore
Article Properties
Article Number: 000207951
Article Type: Solution
Last Modified: 13 Jun 2025
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.