ECS: SSL-certifikatverktyg för data och hantering

Summary: ECS-certifikatverktyget kan hjälpa dig att ladda upp SSL-certifikat till ECS-datagränssnittet och ECS-hanteringsgränssnittet.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Sedan lanseringen av ObjectScale har verktyget skrivits om på grund av olika Python-versioner mellan ECS och ObjectScale. Den senaste versionen är ecs_certificate_tool-1.7.

  • För ECS-användning: ecs_certificate_tool.py
  • För ObjectScale använder du: obs_certificate_tool.py

Index:

Installation

  1. Ladda ner den senaste versionen av verktyget som bifogas i den här kunskapsbasartikeln
  2. Ladda upp verktyget till /home/admin på en av ECS-noderna.
  3. Ändra till /home/admin och packa upp paketet.
$ cd /home/admin
$ unzip ecs_certificate_tool-1.7.zip
  1. Ändra till certifikatverktygets katalog.
$ cd ecs_certificate_tool-1.7
  1. Konfigurera root UI-inloggningsuppgifter för det verktyg som ska användas.
Kommando: 
$ python ecs_certificate_tool.py configure_credentials
Exempel: 
admin@:~/ecs_certificate_tool-1.7> python ecs_certificate_tool.py configure_credentials
ecs_certificate_tool v1.7

=======> Configuring Credentials

Please enter the password for the root management user:
Authenticating using configured credentials..PASS

Successfully configured credentials!
  1. Använd certifikatverktyget för att generera din SAN-konfiguration (Subject Alternative Name). Du måste lägga till manuellt b>fqdn och ip-address av lastbalanseraren om du använder en.
Kommando: 
python ecs_certificate_tool.py generate_san
Exempel: 
$ python ecs_certificate_tool.py generate_san
ecs_certificate_tool v1.7
log_file: /home/admin/ecs_certificate_tool-1.7/certificate_tool.log

======================================================================
Generating SAN (subject alternative name) config.
======================================================================

----------------------------------------------------------------------
Setting DATA_SUBJECT_ALTERNATIVE_NAME config
----------------------------------------------------------------------
Set DNS_NAMES to :
['layton-ex3000.example.com',
 'ogden-ex3000.example.com',
 'orem-ex3000.example.com',
 'provo-ex3000.example.com',
 'sandy-ex3000.example.com']

Set IP_ADDRESSES to :
['192.0.2.104',
 '192.0.2.105',
 '192.0.2.106',
 '192.0.2.107',
 '192.0.2.108']

----------------------------------------------------------------------
Setting MANAGEMENT_SUBJECT_ALTERNATIVE_NAME config
----------------------------------------------------------------------
Set DNS_NAMES to :
['layton-ex3000.example.com',
 'ogden-ex3000.example.com',
 'orem-ex3000.example.com',
 'provo-ex3000.example.com',
 'sandy-ex3000.example.com']

Set IP_ADDRESSES to :
['192.0.2.104',
 '192.0.2.105',
 '192.0.2.106',
 '192.0.2.107',
 '192.0.2.108']

Wrote changes to: /home/admin/ecs_certificate_tool-1.7/config.ini
DONE

Konfiguration

  • Informationen config.ini -filen är den plats där du anger alla värden för certifikatet.
  • Om du inte vill använda ett värde lämnar du det tomt som i exemplet nedan:
# optional unit name
ORGANIZATIONAL_UNIT_NAME =
  • Här är ett exempel på hur standard config.ini ser ut:
[GENERAL]
COMMON_NAME = *.ecs.example.com
# Two letter country name
COUNTRY_NAME = US
LOCALITY_NAME = Salt Lake City
STATE_OR_PROVINCE_NAME = Utah
STREET_ADDRESS = 123 Example Street
ORGANIZATION_NAME = Example Inc.
# optional unit name
ORGANIZATIONAL_UNIT_NAME =
# optional email address
EMAIL_ADDRESS = example@example.com

[UI_CREDENTIALS]
USERNAME = root
PASSWORD = ChangeMe

[SELF_SIGNED]
# 1825 days = 5 years
VALID_DAYS = 1825

[DATA_SUBJECT_ALTERNATIVE_NAME]
DNS_NAMES = node1.ecs.example.com node2.ecs.example.com node3.ecs.example.com
IP_ADDRESSES = 192.0.2.1 192.0.2.2 192.0.2.3 192.0.2.4

[MANAGEMENT_SUBJECT_ALTERNATIVE_NAME]
DNS_NAMES = node1.ecs.example.com node2.ecs.example.com node3.ecs.example.com
IP_ADDRESSES = 198.51.100.1 198.51.100.2 198.51.100.3 198.51.100.4

[ADVANCED]
# Probably dont use these unless you really know what your doing
SERIAL_NUMBER =
SURNAME =
GIVEN_NAME =
TITLE =
GENERATION_QUALIFIER =
X500_UNIQUE_IDENTIFIER =
DN_QUALIFIER =
PSEUDONYM =
USER_ID =
DOMAIN_COMPONENT =
JURISDICTION_COUNTRY_NAME =
JURISDICTION_LOCALITY_NAME =
BUSINESS_CATEGORY =
POSTAL_ADDRESS =
POSTAL_CODE =
INN =
OGRN =
SNILS =
UNSTRUCTURED_NAME =

Visa dina aktuella certifikat

  1. Kör ecs_certificate_tool view_certs operation.
Kommando: 
$ python ecs_certificate_tool.py view_certs
Exempel: 
ecs_certificate_tool v7.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

Authenticating using configured credentials..PASS

----------------------------------------------------------------------
View certificates
----------------------------------------------------------------------

======================================================================
Data Certificate:
======================================================================

Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            3b:0f:a3:e2:fa:0a:90:14:86:6c:a3:3a:26:5c:0b:8d:6e:18:7d:eb
    Signature Algorithm: sha256WithRSAEncryption
        Issuer: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Validity
            Not Before: Oct 17 18:35:06 2020 GMT
            Not After : Oct 16 18:35:06 2025 GMT
        Subject: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:ad:13:ea:31:bb:13:30:fc:ad:75:1a:84:16:53:
                    76:9d:0d:96:60:69:04:70:ad:00:76:c5:e4:f0:39:
                    3d:e3:9b:2e:2a:06:0b:ae:29:16:22:69:73:1d:2b:
                    27:73:68:7a:42:62:84:37:9b:7e:7f:60:48:aa:80:
                    14:96:07:52:ac:d5:dd:1f:af:59:3b:88:5e:15:43:
                    f1:9e:29:91:0a:6d:19:8e:41:4b:3c:9f:0c:64:16:
                    5c:c6:61:a6:c7:28:a9:9e:14:81:10:7e:4a:4f:25:
                    93:20:d9:5b:fe:b3:ac:56:28:f0:89:2c:e3:97:18:
                    df:1d:e3:1b:6d:c5:08:fb:d6:97:81:82:b1:6b:33:
                    45:1d:de:7a:30:5c:6d:4a:70:96:06:f8:05:48:a7:
                    89:ad:ce:db:99:f2:61:88:92:75:e5:cf:d2:b1:2c:
                    28:60:6f:5e:ba:6c:02:f4:12:90:be:eb:6d:48:ae:
                    b2:3a:6e:76:a6:02:b1:9e:f7:95:2c:65:8a:80:1a:
                    64:52:ec:f5:0c:2b:c8:87:a7:e5:4d:f7:34:60:a5:
                    49:03:30:27:10:8d:ad:4e:92:52:8b:d9:6b:ad:2d:
                    15:60:a5:26:fc:1b:1d:69:9f:5c:a3:0f:d9:cb:b9:
                    1d:68:30:6c:c8:ca:e1:71:4b:88:bd:98:d7:10:ae:
                    89:c5
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Subject Alternative Name:
                DNS:node1.ecs.example.com, DNS:node2.ecs.example.com, DNS:node3.ecs.example.com, IP Address:192.0.2.1, IP Address:192.0.2.2, IP Address:192.0.2.3, IP Address:192.0.2.4
            X509v3 Basic Constraints: critical
                CA:FALSE
            X509v3 Key Usage: critical
                Digital Signature, Non Repudiation, Key Encipherment
            X509v3 Extended Key Usage: critical
                TLS Web Server Authentication
            X509v3 Authority Key Identifier:
                0.
    Signature Algorithm: sha256WithRSAEncryption
         33:85:7e:3b:fd:fd:3a:35:97:17:11:2d:4d:e1:7e:03:35:82:
         8a:47:30:ed:b2:f9:1b:b4:22:a2:60:00:b5:9c:aa:6c:0d:e7:
         ea:c7:0a:e6:05:24:7d:bd:50:ab:23:9b:16:6a:e7:be:e9:21:
         26:61:0e:e5:e1:62:7e:d8:01:3a:3e:19:14:89:c2:ef:62:a0:
         17:5c:80:2b:24:6b:96:73:fa:b0:8f:4d:09:0e:69:4f:72:f0:
         4d:b1:13:8d:90:4e:18:4b:82:be:fd:48:b0:c2:9d:9c:43:d9:
         d9:73:e6:15:88:79:1f:3e:13:ec:c9:6f:5f:2a:08:7c:a7:5d:
         b4:e1:50:0f:3c:49:e3:e4:9f:8f:dd:e0:b5:b5:2d:d8:2d:29:
         94:2d:4b:66:20:36:f0:ae:3a:ae:a4:c5:91:3c:f4:2a:d6:f5:
         24:ec:7b:3a:96:d6:75:91:f9:b3:1c:8a:93:87:1b:d7:f2:f7:
         72:4d:0c:02:b9:2e:ab:f6:76:ca:c5:74:39:e0:a0:54:2b:85:
         4d:dd:e6:c7:fc:d0:e7:bc:3e:9e:98:19:e5:ed:ad:5f:4b:ea:
         20:17:c5:23:eb:09:ad:8e:13:57:75:78:f9:68:bb:18:34:fc:
         3a:26:94:90:5e:ed:a6:09:bb:14:5c:bd:2e:d3:5b:c4:43:08:
         66:95:e7:ee


======================================================================
Management Certificate:
======================================================================

Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            3b:0f:a3:e2:fa:0a:90:14:86:6c:a3:3a:26:5c:0b:8d:6e:18:7d:eb
    Signature Algorithm: sha256WithRSAEncryption
        Issuer: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Validity
            Not Before: Oct 17 18:35:06 2020 GMT
            Not After : Oct 16 18:35:06 2025 GMT
        Subject: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:ad:13:ea:31:bb:13:30:fc:ad:75:1a:84:16:53:
                    76:9d:0d:96:60:69:04:70:ad:00:76:c5:e4:f0:39:
                    3d:e3:9b:2e:2a:06:0b:ae:29:16:22:69:73:1d:2b:
                    27:73:68:7a:42:62:84:37:9b:7e:7f:60:48:aa:80:
                    14:96:07:52:ac:d5:dd:1f:af:59:3b:88:5e:15:43:
                    f1:9e:29:91:0a:6d:19:8e:41:4b:3c:9f:0c:64:16:
                    5c:c6:61:a6:c7:28:a9:9e:14:81:10:7e:4a:4f:25:
                    93:20:d9:5b:fe:b3:ac:56:28:f0:89:2c:e3:97:18:
                    df:1d:e3:1b:6d:c5:08:fb:d6:97:81:82:b1:6b:33:
                    45:1d:de:7a:30:5c:6d:4a:70:96:06:f8:05:48:a7:
                    89:ad:ce:db:99:f2:61:88:92:75:e5:cf:d2:b1:2c:
                    28:60:6f:5e:ba:6c:02:f4:12:90:be:eb:6d:48:ae:
                    b2:3a:6e:76:a6:02:b1:9e:f7:95:2c:65:8a:80:1a:
                    64:52:ec:f5:0c:2b:c8:87:a7:e5:4d:f7:34:60:a5:
                    49:03:30:27:10:8d:ad:4e:92:52:8b:d9:6b:ad:2d:
                    15:60:a5:26:fc:1b:1d:69:9f:5c:a3:0f:d9:cb:b9:
                    1d:68:30:6c:c8:ca:e1:71:4b:88:bd:98:d7:10:ae:
                    89:c5
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Subject Alternative Name:
                DNS:node1.ecs.example.com, DNS:node2.ecs.example.com, DNS:node3.ecs.example.com, IP Address:192.0.2.1, IP Address:192.0.2.2, IP Address:192.0.2.3, IP Address:192.0.2.4
            X509v3 Basic Constraints: critical
                CA:FALSE
            X509v3 Key Usage: critical
                Digital Signature, Non Repudiation, Key Encipherment
            X509v3 Extended Key Usage: critical
                TLS Web Server Authentication
            X509v3 Authority Key Identifier:
                0.
    Signature Algorithm: sha256WithRSAEncryption
         33:85:7e:3b:fd:fd:3a:35:97:17:11:2d:4d:e1:7e:03:35:82:
         8a:47:30:ed:b2:f9:1b:b4:22:a2:60:00:b5:9c:aa:6c:0d:e7:
         ea:c7:0a:e6:05:24:7d:bd:50:ab:23:9b:16:6a:e7:be:e9:21:
         26:61:0e:e5:e1:62:7e:d8:01:3a:3e:19:14:89:c2:ef:62:a0:
         17:5c:80:2b:24:6b:96:73:fa:b0:8f:4d:09:0e:69:4f:72:f0:
         4d:b1:13:8d:90:4e:18:4b:82:be:fd:48:b0:c2:9d:9c:43:d9:
         d9:73:e6:15:88:79:1f:3e:13:ec:c9:6f:5f:2a:08:7c:a7:5d:
         b4:e1:50:0f:3c:49:e3:e4:9f:8f:dd:e0:b5:b5:2d:d8:2d:29:
         94:2d:4b:66:20:36:f0:ae:3a:ae:a4:c5:91:3c:f4:2a:d6:f5:
         24:ec:7b:3a:96:d6:75:91:f9:b3:1c:8a:93:87:1b:d7:f2:f7:
         72:4d:0c:02:b9:2e:ab:f6:76:ca:c5:74:39:e0:a0:54:2b:85:
         4d:dd:e6:c7:fc:d0:e7:bc:3e:9e:98:19:e5:ed:ad:5f:4b:ea:
         20:17:c5:23:eb:09:ad:8e:13:57:75:78:f9:68:bb:18:34:fc:
         3a:26:94:90:5e:ed:a6:09:bb:14:5c:bd:2e:d3:5b:c4:43:08:
         66:95:e7:ee



DONE


Välj i listan nedan vilken typ av certifikat du vill skapa:

Skapa begäran om att signera

Användning:

ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_csr [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create certificate signing request for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create certificate signing request for management
                        interface (WEB UI)

Skapa en CSR för datagränssnittet:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_csr -d
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 192.0.2.1..PASS
Validating IPv4Address: 192.0.2.2..PASS
Validating IPv4Address: 192.0.2.3..PASS
Validating IPv4Address: 192.0.2.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data_private.key
----------------------------------------------------------------------
Certificate Signing Request
----------------------------------------------------------------------

Creating Certificate Signing Request..DONE
Wrote certificate signing request to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data.csr

Creating a CSR for the management interface:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_csr -m
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 198.51.100.1..PASS
Validating IPv4Address: 198.51.100.2..PASS
Validating IPv4Address: 198.51.100.3..PASS
Validating IPv4Address: 198.51.100.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management_private.key
----------------------------------------------------------------------
Certificate Signing Request
----------------------------------------------------------------------

Creating Certificate Signing Request..DONE
Wrote certificate signing request to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management.csr

Skapa ett självsignerat certifikat

Användning:

ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_ssc [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create self-signed certificate for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create self-signed certificate for management
                        interface (WEB UI)

Skapa ett självsignerat certifikat för datagränssnittet:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_ssc -d
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 192.0.2.1..PASS
Validating IPv4Address: 192.0.2.2..PASS
Validating IPv4Address: 192.0.2.3..PASS
Validating IPv4Address: 192.0.2.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data_private.key
----------------------------------------------------------------------
Self-signed certificate
----------------------------------------------------------------------

Creating self-signed certificate..DONE
Wrote Certificate to: /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data.crt
admin@provo-ex3000:~/ecs_certificate_tool-1.0>

Creating a self-signed certificate for the management interface:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_ssc -m
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 198.51.100.1..PASS
Validating IPv4Address: 198.51.100.2..PASS
Validating IPv4Address: 198.51.100.3..PASS
Validating IPv4Address: 198.51.100.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management_private.key
----------------------------------------------------------------------
Self-signed certificate
----------------------------------------------------------------------

Creating self-signed certificate..DONE
Wrote Certificate to: /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management.crt

Ladda upp ditt certifikat

Om du använder ett självsignerat certifikat som det här verktyget har genererat finns den privata nyckeln och certifikatet redan i den aktuella katalogen.

Om du har ett certifikat som är signerat av en certifikatutfärdare överför du det till ECS och placerar det i certifikatverktygskatalogen.
 

Obs! Se till att du laddar upp hela certifikatkedjan (rot/mellanliggande) om det krävs för din miljö. Se #ECS: SSL-certifikatverktyg för data och hantering vid behov.


Datacertifikat

Kommando:

$ python ecs_certificate_tool.py upload_certificate -c <path to certificate> -p <path to private key> --data

Exempel:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ecs_certificate_tool.py upload_certificate -c ./FNM00181300310-data.crt -p FNM00181300310-data_private.key --data
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Upload Certificate
----------------------------------------------------------------------

Authenticating using configured credentials..PASS

Reading certificate from: ./FNM00181300310-data.crt..DONE
Reading private key from: FNM00181300310-data_private.key..DONE
Verifying the private key matches the certificate..DONE
Uploading the certificate to ECS..DONE

admin@provo-ex3000:~/ecs_certificate_tool-1.0>

När du har laddat upp certifikatet har du två alternativ:

  1. Vänta 2 timmar på dataheadsvc för att sprida det nya certifikatet i klustret.
  2. Manuell omstart dataheadsvc på den nod som du körde verktyget från, men tänk på att detta kan ha en kort inverkan.

Kommando för att starta om dataheadsvc:

# sudo kill -9 `pidof dataheadsvc`


Hanteringscertifikat

Kommando:

$ python ./ecs_certificate_tool.py upload_certificate -c <path to certificate> -p <path to private key> --management

Exempel:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py upload_certificate -c ./FNM00181300310-management.crt -p FNM00181300310-management_private.key -m
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Upload Certificate
----------------------------------------------------------------------

Authenticating using configured credentials..PASS

Reading certificate from: ./FNM00181300310-management.crt..DONE
Reading private key from: FNM00181300310-management_private.key..DONE
Verifying the private key matches the certificate..DONE
Uploading the certificate to ECS..DONE


När du har laddat upp det nya hanteringscertifikatet måste du utföra löpande omstarter av objcontrolsvc/nginx i hela klustret. Detta kan ha en minimal inverkan på användargränssnittsåtkomsten.

  1. Generera en klusteromfattande MACHINES-fil :
$ sudo getclusterinfo -a /root/MACHINES.VDC && sudo viprscp -f /root/MACHINES.VDC /root/MACHINES.VDC /root/;sudo viprscp -f /root/MACHINES.VDC /root/MACHINES.VDC /home/admin/;sudo viprexec -i -f /home/admin/MACHINES.VDC "pingall; md5sum /root/MACHINES.VDC /home/admin/MACHINES.VDC"
  1. Starta om objcontrolsvc I hela klustret:
$ viprexec -f ~/MACHINES.VDC -i 'pidof objcontrolsvc; kill -9 `pidof objcontrolsvc`; sleep 60; pidof objcontrolsvc'
  1. Starta om nginx I hela klustret:
$ viprexec -f ~/MACHINES.VDC -i -c "/etc/init.d/nginx restart;sleep 60;/etc/init.d/nginx status"

Exempel på certifikat

Hel kedja (root/intermediate/ecs)

-----BEGIN CERTIFICATE-----
<content of your ECS certificate>
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
<content of intermediate certificate>
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
<content of root certificate>
-----END CERTIFICATE-----

Additional Information

Versionskommentarer:

12/12/2020     1.0 - Fix outputting when password not configured in config.ini during view_certs operation

02/12/2021     1.1 - Support different hostnames for data/management interfaces #3
                   - Rewrote view_certs so it works if no certs have been uploaded yet. #2
                   - backup original certifiate before uploading new one. #1

04/07/2021     1.2 - nuke certs #10
                   - fix urllib3 warnings
                   - fix logging
                   - output additional info when viewing certs #9
07/06/2021     1.3 - Support 1024/2048/4096 private key sizes #14

09/24/2021     1.4 - #18 - Fix bug in get_issuer
                   - #19 - Remove sudo requirement and force admin user
                   - #23 - Handle Credentials with ?{}|&~![()^"

05/11/2025     1.7 - ObjectScale is running SLES 15 SP4, which has no Python 2 support any longer. So the tool got separated into two scripts:
                     For ECS use ecs_certificate_tool.py
                     For ObjectScale use: obs_certificate_tool.py
                   - Modified the key-length to minimum as 3072 and default as 4096  for ObjectScale version (for ECS its 2048). (OBSDEF-52084]: Update self generated certificate key length (#16329) )

Åtgärder:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py -h
ecs_certificate_tool v0.9
log_file: /home/admin/ecs_certificate_tool-0.9/certificate_tool.log
 
usage: ecs_certificate_tool.py [-h]
                               {view_certs,generate_san,create_csr,create_ssc,upload_certificate}
                               ...
 
positional arguments:
  {view_certs,generate_san,create_csr,create_ssc,upload_certificate}
                        sub-command help
    view_certs          Shows the current certificates on the data and
                        management interfaces
    generate_san        Generates the subject alternative name IP addresses
                        and domain names from fabric and adds them to the ini
                        config file
    create_csr          Create certificate signing request
    create_ssc          Create self-signed certificate
    upload_certificate  Upload certificate to the data interface
 
optional arguments:
  -h, --help            show this help message and exit

Skapa begäran om att signera certifikat:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py create_csr -h
ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_csr [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create certificate signing request for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create certificate signing request for management
                        interface (WEB UI)

Skapa ett självsignerat certifikat:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py create_ssc -h
ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_ssc [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create self-signed certificate for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create self-signed certificate for management
                        interface (WEB UI)

Ladda upp certifikat:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py upload_certificate -h
ecs_certificate_tool v0.9
log_file: /home/admin/ecs_certificate_tool-0.9/certificate_tool.log
 
usage: ecs_certificate_tool.py upload_certificate [-h] -c CERTIFICATE -p
                                                  PRIVATE_KEY (-d | -m)
 
optional arguments:
  -h, --help            show this help message and exit
  -c CERTIFICATE, --certificate CERTIFICATE
                        Filepath to the data certificate
  -p PRIVATE_KEY, --private_key PRIVATE_KEY
                        Filepath to private key with no password
  -d, --data            Upload certificate to the data interface
  -m, --management      Upload certificate to the management interface

Certifikaten ska formateras enligt följande:

——BEGIN CERTIFICATE——
host certificate
——END CERTIFICATE——
——BEGIN CERTIFICATE——
intermediate certificate
——END CERTIFICATE——
——BEGIN CERTIFICATE——
root certificate
——END CERTIFICATE——

Affected Products

ECS, ECS Appliance, ECS Appliance Gen 1, ECS Appliance Gen 2, ECS Appliance Gen 3, ECS Appliance Hardware Gen1 U-Series, ECS Appliance Hardware Gen1 C-Series, ECS Appliance Hardware Gen2 C-Series, ECS Appliance Hardware Gen2 D-Series , ECS Appliance Hardware Gen2 U-Series ...

Products

ECS Appliance Hardware Gen3 EX300, ECS Appliance Hardware Gen3 EX3000, ECS Appliance Hardware Gen3 EX500, ECS Appliance Hardware Gen3 EXF900, ECS Appliance Hardware Series, ECS Appliance Software with Encryption , ECS Appliance Software without Encryption ...
Article Properties
Article Number: 000181006
Article Type: How To
Last Modified: 11 Aug 2025
Version:  21
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.