ECS: OBS: Spine Switch Lossless Configuration OK - Symptom ID: 2081

Summary: This alert is introduced in ObjectScale (OBS) 4.1.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Symptom Code Severity
2081 Info


Spine Switch Lossless Configuration OK - Symptom ID: 2081

Cause

The lossless configuration is correct on the spine switches.

Resolution

Validate the spine switch lossless configuration is correct and that no additional actions are required.

admin@provo-rust:~> sudo /opt/emc/nile/bin/check_lossless_switch --switch_type spine
Multiple DSCP mapping tables are configured on eagle
Multiple DSCP mapping tables are configured on falcon
[OK]

If the issue persists and no dial-home is generated, contact technical support by opening a service request (SR). 

Affected Products

ECS, ECS Appliance Software with Encryption, ECS Appliance Software without Encryption, ObjectScale Appliance Software with Encryption, ObjectScale Appliance Software without Encryption, ObjectScale Appliance Series
Article Properties
Article Number: 000320370
Article Type: Solution
Last Modified: 17 Dec 2025
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.