Dell Unity: Como configurar o ESRS integrado usando a CLI

Summary: Veja a seguir as etapas que podem ser executadas para habilitar o ESRS integrado usando a CLI em um array do Unity. (Corrigível pelo usuário)

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Este artigo da KB destina-se a percorrer as etapas necessárias para configurar e provisionar o ESRS integrado em um array do Unity usando a CLI.

Etapa 1: Definir informações
de contatoO comando a seguir é usado para mostrar e definir as informações de contato.

uemcli -u local/admin -securepassword /sys/info show
uemcli -u local/admin -securepassword /sys/info set -contactFirstName <First> -contactLastName <Last> -contactEmail <Email> -contactPhone <Phone#>

Etapa 2: Verifique a conta de suporte on-line da EMC.
Os comandos a seguir são usados para mostrar e definir a conta de suporte on-line da EMC usada para registrar o array do Unity.

uemcli -u local/admin -securepassword /sys/support/account show
uemcli -u local/admin -securepassword /sys/support/account set -user <EMC Online Support account> -passwdSecure <pass>

Etapa 3: Verifique o EULA.
Os comandos a seguir são usados para mostrar e aceitar a licença do EULA.

uemcli -u local/admin -securepassword /sys/support/esrsi show
uemcli -u local/admin -securepassword /sys/support/esrsi set -acceptEula yes   (***If not already accepted***)

Etapa 4: Execute o networkCheck for ESRS.

uemcli -u local/admin -securepassword /sys/support/esrsi checkNetwork

Etapa 5: solicitar o AccessCode
O comando a seguir é usado para solicitar um AccessCode do support.emc.com. Esse código de acesso é enviado para o e-mail da conta de suporte on-line da EMC especificado na etapa 2.

uemcli -u local/admin -securepassword /sys/support/esrsi requestAccessCode

Etapa 6: Veja as Informações do site.
O comando a seguir é usado para exibir e verificar um ou mais sites aos quais sua conta tem acesso.

uemcli -u local/admin -securepassword /sys/support/esrsi/site show -accessCode <code> -detail

Etapa 7: Ative o ESRS no SiteId.
O comando a seguir é a última etapa na qual você pode ativar o ESRS para o array usando o ID do site da Etapa 6. Se vários locais forem retornados na etapa 6, certifique-se de que o local correto seja especificado.

uemcli -u local/admin -securepassword /sys/support/esrsi set -enable yes -siteId <siteid>

Saídas de comando da CLI

 13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Contact first name    =
      Contact last name     =
      Contact company       =
      Contact email address =
      Contact phone number  =
      Location name         =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info set -contactFirstName John -contactLastName Doe -contactEmail Globe@myCompany.com -contactPhone 1234567890

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Support user name =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account set -user Globe@myCompany.com -passwdSecure

Password:
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Enabled       = no
      EULA accepted = no

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -acceptEula yes

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:00:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi checkNetwork

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:14:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi requestAccessCode

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Recipient email address =  G*****@myCompany.com.

Operation completed successfully.

21:15:22 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi/site show -accessCode 123456 -detail

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Site ID          = 123456
      Party ID         = 987654321
      Site name        = My Company
      Site description =
      Address          = 123 My Address
      State            = MA
      Country          = US
      Country name     =
      City             = Hopkinton
      Current location = yes

21:20:46 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -enable yes -siteId 123456

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

 

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F , Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid ...
Article Properties
Article Number: 000022686
Article Type: How To
Last Modified: 27 Nov 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.